Dell UltraSharp 2208WFP Manual page 36
Aio flat panel monitor for dell optiplex sff computer
Hide thumbs
Also See for UltraSharp 2208WFP:
- Setup manual (2 pages) ,
- User manual (31 pages) ,
- Service manual (63 pages)
Table of Contents
Advertisement
Attaching the Dell Soundbar (optional)
NOTICE: Do not use the soundbar power connector with any other device.
1.
Attach the Soundbar by aligning the two slots on the Soundbar with the two tabs on the bottom of the monitor.
2.
Slide the Soundbar to the left until it snaps in to place.
3. Plug in the power cord from the Soundbar in to the connector on the back of the monitor.
4.
Insert the green stereo plug from the Soundbar in to your computer's audio output connector.
NOTE: Soundbar Power Connector +12V DC output is optional .
NOTICE: Do not use with any device other than Dell Soundbar .
Advertisement
Table of Contents
