Dell UltraSharp 2208WFP Manual page 22

Language Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, or Japanese).
Menu Transp
This function is used to adjust the OSD background from opaque to transparent.
arency
Menu Timer OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the and
Menu Lock
Controls user access to adjustments. When 'Lock'
button.
NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre-
selected on entry. Press and hold
Menu Rotates the OSD by 90 degrees counter-clockwise.
Rotation
Audio To turn on or off audio power during power save mode.
Options
Default is "Enable". Select Disable to disable this feature.
Yes — Turn off audio power during power save mode.
No — Turn on audio power during power save mode.
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable
via software on your PC. You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
LCD If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD
Conditioning Conditioning feature may take several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature
does not remove burn-in.
NOTE: Use LCD Conditioning only when you experience a problem with image retention.
Factory Reset Reset all OSD settings to the factory preset values.
Exit Menu
Push to exit the OSD main menu.
buttons to adjust the slider in 1 second increments, from 5 to 60 seconds.
button for 15 seconds to unlock and allow user access to all applicable settings.
is selected, no user adjustments are allowed. All buttons are locked except