Setting Up The Monitor - Dell UltraSharp 2208WFP Manual

Back to Contents Page

Setting Up the Monitor

Dell™ 2208WFP AIO Flat Panel Monitor For Dell OptiPlex™ SFF Computer
Cable Connections on the Back of the Monitor and the Computer
Removing the Cable Cover and the Computer from the Stand
Detaching the Monitor from the Stand
Attaching the Dell Soundbar (optional)
Cable Connections on the Back of the Monitor and the Computer
1.Attach the monitor to the stand
a. Fit the groove on the back of the monitor onto the two tabs on the stand.
b. Lower the monitor until it locked in to place on the stand.
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: If you want to mount your AIO stand to a desktop, see the
2.Verify if the hook triggers are at extended position before mounting the computer to the stand
NOTE: The hooks trigger are extended when the stand is shipped from the factory.
If the trigger hooks are at locked down position
a. Slide the unlock switch to the right.
b. The hook triggers will be released to the extended position.
AIO Stand Template Sheet (*.pdf)