Troubleshooting - Wahl James Martin ZX971 Manual

1. Always unplug the appliance before cleaning.
2. Disassemble all removable parts before cleaning.
3. Clean the main housing with a clean damp cloth and dry thoroughly.
Ensure that the interlock areas are free from food.
4. Clean all removable parts in a dishwasher or in luke warm soapy water
using a mild detergent.
5. Use the cleaning brush provided to carefully clean food from the slicing
and grating disc and spiralizing attachment.
6. Push access cord into the storage area in the bottom of the housing.

TROUBLESHOOTING

Not turning on or Ensure that the processor lid and bowl are correctly fitted
functioning and locked into place (Fig.6A & B). This appliance has safety
features that will not allow it to work unless it is correctly
assembled.
Not blending Ensure the food to be blended is in small manageable
satisfactorily pieces approx. 2.5cm with cores and hard pieces removed
and there is enough liquid to allow the food to move
around and blend. If required remove the blender jug and add
a little more liquid, ensure there is nothing jamming the blade
replace the lid and place back on the motor unit.
Using the pulse setting can help agitate the ingredients and
move them around for better blending results.
Not processing Sometimes if there is only a small amount to process, pulsing
satisfactorily can help the ingredients to contact the blade and process more
effectively.
Pulsing can also allow larger quantities to be agitated and
moved around for better and more accurate processing. This will
also help avoid over processing.
You may find with certain ingredients and small quantities
removing the bowl and using a scraper to return ingredients to
the centre of the processor will improve the result.
Not spiralizing Ensure the required cutter is positioned so the arrow lines up
satisfactorily with the marking on the handle, see Fig 7.
Ensure you are using the small feed chute as this is designed
to fit the size of the cutters see Fig 8. Ensure vegetables are
placed down the chute securely onto the cutter and the small
pusher is placed against the top of the vegetable and gently
pushed down as the processor is operated.
Blade, cutting Ensure that the drive shaft is in place see Fig 1E.
disc or spiralizer
attachment not
rotating, motor is
running.
James Martin Food Processor with Spiralizer
11