Table of Contents
Advertisement
CLEANING AND MAINTENANCE
NOTE: Always clean removable parts immediately after use.
WARNING: BE CAREFUL WHEN CLEANING THE PARTS. AVOID
TOUCHING THE BLADES AS THESE ARE EXTREMELY SHARP. NEVER
IMMERSE THE MAIN HOUSING IN WATER OR ANY OTHER LIQUID
1. Always unplug the appliance before cleaning.
2. Disassemble all removable parts before cleaning.
3. Clean the main housing with a clean damp cloth and dry thoroughly.
Ensure that the interlock areas are free from food.
4. Clean all removable parts in a dishwasher or in luke warm soapy water
using a mild detergent.
5. Push access cord into the storage area in the bottom of the housing.
TROUBLESHOOTING
Not turning on or
Ensure that the processor lid and bowl are correctly fitted
functioning
and locked into place (Fig.5A & B). This appliance has safety
features that will not allow it to work unless it is correctly
assembled.
Not blending
Ensure the food to be blended is in small manageable
satisfactorily
pieces approx. 2.5cm with cores and hard pieces removed
and there is enough liquid to allow the food to move
around and blend. If required remove the blender jug and add
a little more liquid, ensure there is nothing jamming the blade
replace the lid and place back on the motor unit.
Using the pulse setting can help agitate the ingredients and
move them around for better blending results.
Not processing
Sometimes if there is only a small amount to process, pulsing
satisfactorily
can help the ingredients to contact the blade and process more
effectively.
Pulsing can also allow larger quantities to be agitated and
moved around for better and more accurate processing. This will
also help avoid over processing.
You may find with certain ingredients and small quantities
removing the bowl and using a scraper to return ingredients to
the centre of the processor will improve the result.
Blade or cutting
Ensure that the drive shaft is in place see Fig.1E
disc not rotating,
motor is running.
James Martin Food Processor
9
Advertisement
Table of Contents
