Wahl James Martin ZX971 Manual page 9

NOTE: The spiralizer attachment cannot be fitted with the blade or slicing and
grating disc in place.
2. Fit the lid with the locking tab (Fig.6A) just to the left of the handle and turn
anti-clockwise to lock into place - ensuring that the top of the drive shaft
locates into the centre of the lid.
3. Place the large pusher with the small feed chute (Fig.8B) into the feed
chute in the lid (Fig.8C). Always use the small feed chute (Fig.8B) and
small pusher (Fig.8A) when spiralizing vegetables. These are designed to
fit the size of the cutters. Cut vegetables to fit the chute, a close fit will give
best results.
4. Push the vegetable down gently so that it is located in place on the cutter.
Turn on the processor to speed 1 and using the small pusher (Fig.8A)
apply gentle pressure to spiralize.
5. Turn off the processor and unplug before removing the lid and the
attachment and removing the processed vegetables.
IMPORTANT: Never use the spiralizing attachment without the small feed
chute. As this will not work effectively and could damage the attachment and
the appliance.
IMPORTANT: Do not operate continuously for more than 3 minutes, allow
the machine to cool before re-using.
Tips for spiralizer attachment
1. Use Fresh Ingredients for best results.
2. Don't cut food too small. Fill the width of the small feed chute as this
prevents food from slipping sideways.
3. There will always be a small amount of waste on the cutter after
spiralizing. Chop and use any off cuts and left over pieces or keep and
add to stocks, stews and slaws etc.
Using the blender
1. Your blender has a removable blade (Fig.5O) for easy cleaning (see
section Cleaning and Maintenance), ensure the blade assembly is
securely in place with the sealing ring (Fig.5N) properly fitted. To remove
or replace the blade assembly twist in the direction of the arrows.
2. Place the jug (Fig.5M) onto the main unit lining up the arrow on the jug
with the unlock symbol on the main unit and turn anti-clockwise to lock into
place (Fig.6D).
3. Add ingredients. Fit the lid (Fig.5L) securely, ensuring it is locked into
place (Fig.6C) the blender is now ready to use.
James Martin Food Processor with Spiralizer
9