Wahl James Martin ZX971 Manual page 7

Using the processor bowl with the stainless steel blade
The stainless steel blade is very versatile and can be used for chopping
meat and vegetables, making salsa, stuffings, pates etc. The length of the
processing will determine the fineness of the chopping and the texture
achieved.
Place the stainless steel blade into the centre of the bowl over the top of the
drive shaft.
Add the desired ingredients into the bowl.
NOTE: Do not over fill, if a large quantity is required it is better to do it in
batches.
1. Fit the lid (Fig.1C) with the locking tab just to the left of the handle and
turn anti-clockwise to lock into place (Fig.6A) - ensuring that the top of the
drive shaft locates into the centre of the lid. The processor is now ready to
use.
Tips for stainless steel blade
1. For best results cut food such as meat, bread, vegetables into similar
sized pieces (approx 2-3 cm) before processing.
2. Biscuits should be broken into pieces and added down the feed chute
whilst the machine is running.
3. When making pastry use fat straight from the fridge cut into 2 cm cubes.
4. You can always pour additional liquid through the feed chute whilst the
machine is running to adjust the consistency of the mixture.
5. Always take care not to over process the ingredients, keep checking the
mixture you can always process for longer if required.
Using the processor bowl with the slicing and grating disk
The slicing and grating disc (Fig.3I) will allow you to slice, grate or shred. The
disc has two cutting sides one for slicing and one for grating and shredding.
Place the disc with the function you require uppermost e.g. if you want to
slice a carrot have the slicing blade facing upwards. Fit the lid and using the
pushers (Fig.1A & B) slowly push the desired food stuff gently on to the blade
do not force.
1. Place the slicing and grating disc on to the top of the drive shaft, with the
cutting blade you require uppermost.
NOTE: The slicing and grating disc cannot be fitted with the blade in place.
2. Fit the lid with the locking tab just to the left of the handle and turn ant-
clockwise to lock into place (Fig.6A) - ensuring that the top of the drive
shaft locates into the centre of the lid. The processor is now ready to use.
James Martin Food Processor with Spiralizer
7