Toro Greensmaster 800 Operator's Manual page 2

This product complies with all relevant European directives;
for details, please see the separate product specific Declaration
of Conformity (DOC) sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on any
forest-covered, brush-covered, or grass-covered land unless
the engine is equipped with a spark arrester, as defined in
Section 4442, maintained in effective working order or the
engine is constructed, equipped, and maintained for the
prevention of fire.
This spark ignition system complies with Canadian ICES-002.
Operating this machine between 5,000 to 8,000 ft
above sea level requires the high-altitude kit. See your
Authorized Toro Dealer.
Introduction
This machine is a walk behind, reel-blade lawn mower
intended to be used by professional, hired operators in
commercial applications. It is primarily designed for cutting
grass on well-maintained lawns in parks, golf courses, sports
fields, and on commercial grounds. It is not designed for
cutting brush, mowing grass and other growth alongside
highways, or for agricultural uses.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers
of your product ready. The model and serial numbers are
located on a plate on the rear frame. Write the numbers in
the space provided.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety-alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
2
(Figure
Figure 1
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
1),
g000502