Table of Contents
Advertisement
1. The quadcopter battery power is low or dead.
2. The Transmitter battery is low or dead.
3. The transmitter band does not correspond to the decoding
of the quadcopter.
1. Insufficient power with the transmitter.
2. Transmitter with the same frequency is being used
nearby.
All the spare parts below can be bought from a local distributor.
1. Charge the quadcopter.
2. Charge or replace the batteries if required.
3. Adjust the band on the transmitter and keep it the
same as the quadcopter.
1. Replace the battery.
2. Use the quadcopter out of the range of other RC
quadcopters.
Advertisement
Table of Contents
Need help?
Do you have a question about the PRO and is the answer not in the manual?
Questions and answers
As soon as I try to increase speed for take off it's going motors off. Is there any setting about the matter. Thanks
The motors of the Quadrone PRO may turn off when trying to increase speed for takeoff due to two possible reasons:
1. Low-Voltage Protection – If the quadcopter's battery is low, the power supply to the rotors will stop automatically. Charging the battery may resolve this issue.
2. Power Surge Protection – If the rotating blades become jammed, the control system will stop supplying power to the rotors automatically. In this case, the signal needs to be rematched to fly again.
This answer is automatically generated