Table of Contents
Advertisement
IMPORTANT INSTRUCTIONS
1. This product is precise equipment that integrates mechanics and electronics with expertise in aerodynamics and
high-frequency transmitting. It is required for the quadcopter to be correctly assembled and debugged to prevent an
accident to occur. The owner of this product should control the quadcopter safely and carefully. Please keep in mind we are
not responsible for this product being used improperly. This may result in severe injury or loss of property and we can not
control the operating process once the user assembles or uses this product.
2. This product is suitable for ages 14 years and up and people who have operating experience in flying a model.
3. Please fly quadcopter in open areas such as a local field and areas that allow remote control flying.
4. Once you are the owner of this product, you are responsible for your actions.
5. If there are any problems while using this product, such as operating or repairing, please reach our sales agent for
details. The sales agent will provide you with the technical support and after-sale service.
REMOTE CONTROLLER DIAGRAM
High/Low
speed switch
Left control lever
(Accelerator)
Photo and video
Turning fine-tuning (Mode 1)
Sideward fine-tuning (Mode 2)
Power ON/OFF
Antenna
1. Use a screwdriver to remove screw on the back of
the transmitter, then open the battery cover (Figure 1)
2. Install 4 "AA" batteries (not included) into the back
of the transmitter then replace the battery cover and
reinstall the screw (Figure 2).
1. Install batteries with correct polarity.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries.
Indicator
Flip mode
Fight control lever
(Directional)
Forward/backward trim
Mode switch
Sideward fine-tuning (Mode 1)
Turning fine-tuning (Mode 2)
LCD display
Advertisement
Table of Contents
Need help?
Do you have a question about the PRO and is the answer not in the manual?
Questions and answers
As soon as I try to increase speed for take off it's going motors off. Is there any setting about the matter. Thanks
The motors of the Quadrone PRO may turn off when trying to increase speed for takeoff due to two possible reasons:
1. Low-Voltage Protection – If the quadcopter's battery is low, the power supply to the rotors will stop automatically. Charging the battery may resolve this issue.
2. Power Surge Protection – If the rotating blades become jammed, the control system will stop supplying power to the rotors automatically. In this case, the signal needs to be rematched to fly again.
This answer is automatically generated