Pjt Mode; High Altitude; Auto Power - LG CineBeam PH30N Owner's Manual

•

[PJT Mode]

This function turns the projected image upside down or flips horizontal.
— When the [Auto Keystone] function is set to [On], only the [Front] and
[Rear] settings are available.
•

[High Altitude]

If the projector is used at an altitude higher than 1200 meters, turn this on.
Otherwise, the projector may overheat or its protection function may be
activated. If this happens, turn the projector off and then on again after waiting
for several minutes.
•

[Auto Power]

Makes the projector turn on automatically when the power cord is connected to
the projector. However, battery-equipped models will immediately turn on once
the power switch is put to
— [On]: When the projector's power switch is put to
— [Off]: When the projector's power switch is put to
into standby mode.
.
, the projector turns on.
, the projector goes
35