Function; Adjusting Picture Mode; To Change Pjt Mode - LG HX301G Owner's Manual

Function

* The On-Screen Display (OSD) in this manual may be slightly different from your projector.
* This operating guide explains operation of RGB(PC) mode mainly.

Adjusting Picture Mode

1. Press the MENU button. Then, move to PICTURE with the
∧, ∨, ＜, ＞ buttons and press the
2. Press the ∧, ∨ buttons to move to a desired function and
OK button.
press the
3. Press the ＜, ＞ buttons to make a desired adjustment and
OK button.
then press the
• You can set image values differently for each input and Picture Mode.
• Saving after making adjustments will display (User) in adjusted Picture Mode.
(except Expert 1/2)
• Execute Picture Reset for Picture Mode to restore back to default factory set-
tings.
• Press the BACK button to exit the menu screen.

To Change PJT Mode

* This function turns the projected image upside down or flips horizontal.
1. Press the Q.MENU button on the remote control.
2. Press the ＜, ＞ buttons to move to PJT Mode.
3. Press the ∧, ∨ button to select a desired item.
• Select Rear when projecting from the back of the transparent screen purchased
separately.
• Select Ceiling when installing the product on the ceiling.
• When PJT Mode is Rear/Ceiling, the left/right of the speaker changes automatically.
• You can use this function through the MENU button.
• Press the BACK button to exit the menu screen.
OK button.
PICTURE
Picture Mode : Standard
• Contrast 50
• Brightness 50
• Sharpness 5
• Color 70
• Tint 0
• Advanced Control
• Picture Reset
PJT Mode
Front
Function
ꔂMove ꔉOK
G
15