Ricoh IWB-D1 Service Training page 38

Model K-C3.5L
Service Mode - 2
The following outlines the 7 service modes.
Device Manager
Checks the hardware conditions (position sensors, capture boards, etc.).
Color Profile Setting
Resets the color profile for the display panel.
Advanced Sensor Adjustment
Adjusts the sensor sensitivity. Necessary after replacing the position
sensors.
Note: Mouse needs to be connected to the IWB USB port.
Advanced Position Adjustment
Calibrates the pen position. Necessary after replacing the position
sensors.
Finger Drawing Mode
Write with fingers to isolate the cause of a problem, i.e. problems caused
pen/position sensors.
Change Electronic Pen ID
Changes the pen ID to prevent interferences of infrared rays emitted from
another pen used in the same room.
Display Color Patterns
Displays color patterns to confirm proper function of the display panel.
Note: A keyboard needs to be connected to the USB port on the IWB.
Slide 38
38