Ricoh IWB-D1 Service Training page 25

Model K-C3.5L
Installation – 2
VESA Standard Compliant Bracket for Wall-mount
A bracket that is VESA standard-compliant is required to mount
the IWB on a wall.
At least 2 persons are required to install, remove, or move the
IWB.
When mounting a VESA-compliant bracket, use the bracket that
corresponds to 400 × 200 mm.
Use brackets that create 6 cm or more of clearance when the
IWB is mounted on a wall or the ceiling.
IWB weighs approx 50kg. Use an appropriate mounting bracket
that can withstand four times the weight of the product.
When mounting the IWB on a wall or the ceiling, select a
location (concrete wall or pillar) that can withstand four times
the combined weight of the IWB and mounting bracket.
When mounting a bracket, use M6 screws.
Use only the VESA screw holes on the back.
Slide 25
25