NUTRIBULLET Nutricook TXG-S3T2 User Manual page 28

How to use.
To adjust the default air frying TIME, select timer control button (Min),
1.
press the (+) or (–) on the right side of the control panel to increase
or decrease TIME in 1 minute increment, from 1 to 60 minutes.
NOTE:
2. To adjust the default air frying Temperature, select temperature
control button (°C), press the (+) or (–) on the right side of the
control panel to adjust the default (190°C) TEMP from 80°C to
200°C in 10 degree increments.
NOTE: Temperature can also be adjusted when temperature reflects on the
digital display using (+) or (–).
3. When the desired TIME and TEMP appear on the digital display,
press the START (
fan (
TIME will begin to count down. TEMP and remaining TIME will
alternate on the digital display.
IMPORTANT:
standby mode.
4. To turn the Air Fryer OFF at any time, or to reset the TIME, simply
press and hold the white POWER (
NOTE:
To halt air frying immediately, pull the frying basket drawer out of the
body at any time. When the frying basket drawer is replaced, air frying will
resume.
5. When the remaining TIME reaches 00:00, the red POWER (
button will appear and the white fan (
20 seconds. 5 beeps will sound as the Air Fryer automatically turns
OFF.
28
Timer can also be adjusted when time reflects on the digital display.
) button to turn the Air Fryer ON. The white
) will twirl when the Air Fryer is in operation. The preset
If no buttons are pressed, the Rapid Air Fryer will remain in
) button.
) will continue to twirl for
)