Bosch PAM 220 Original Instructions Manual page 22

22 | English
will need to be applied. Extremely acute (sharp) angles can be cut using a
taper jig with a table saw or a circular saw.
Product Description and Specifications
Please observe the illustrations at the beginning of this operating manual.
Intended Use
The measuring tool is intended for measuring and transferring angles, calcu-
lating simple and compound mitre/bevel angles, and checking and aligning
mitre and bevel angles.
The measuring tool is suitable for indoor use.
Product Features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
(1) Fold-out leg
(2) Leg extension
(3) Base leg
(4) Illuminated display
(5) Level for horizontal alignment
(6) Level for vertical alignment
(7) Button for compound mitre COM
(8) Button for simple mitre MTR
(9) Hold/Clear button Hold
(10) Button for supplementary angle 180°
(11) On/off button
(12) Battery compartment
(13) Serial number
(14) Locking mechanism of the battery compartment cover
(15) Battery compartment cover
(16) Scale on leg extension
1 609 92A 56P | (12.07.2019) Bosch Power Tools