4. Temperature And Humidity Condition; 3.4 Important Safety Instructions - progressive automations NY-01 User Manual

3.4 IMPORTANT SAFETY INSTRUCTIONS

When using an electrical mounting system, basic precautions should always
be followed, including the following:
Read all instructions before using (this mounting system).
Danger to reduce the risk of electric shock:
1. always unplug this mounting system from the electrical outlet before cleaning warning- to
reduce the risk of electric shock.
2. unplug from outlet before putting on or taking off parts.
3. Use this mounting system only for its intended use as described in these instructions .do not
use attachments not recommended by the manufacturer.
4. never operate this mounting system if it has a damaged cord or plug. If it is not working
properly, return the mounting system to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never operate the mounting system with the air openings blocked .keep the air openings free
of lint, hair, and the like.
7. Never drop or insert any object into any opening.
8. Do not use outdoors unless marked for outdoor use.
9. Route cords and cables as shown in the installation instructions.
10. To disconnect, turn all controls to the off position, then remove plug from outlet.
4 Temperature and humility condition:
-20 C - +50 C, 80%HR
Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)this device may not cause harmful interference, and (2) this device must accept any
interference received,including interference that may cause undesired operation.
SAVE THESE INSTRUCTIONS
USER'S GUIDE
Page 4