Advertisement
Operation
Using the ExcelaRate Software
Note: You can use the software immediately after installing the kit.
InfoCenter Home Screen
When you start the machine, the home screen appears,
displaying the corresponding icons that apply (i.e., the parking
brake is engaged, the boom sections are in the On position,
the operator is out of the seat, etc.).
15
14
13
12
11
10
1. Master boom-switch
indicator—on
2. Right boom-section
indicator—on
3. Target-application rate
(gpa)
4. System-pressure indicator
(psi)
Master Boom-Switch Indicator
The master boom-switch indicator displays when the master
boom is in the O
position
N
1
9
5. Tank-volume indicator (US
gallons)
6. Rinse-system indicator—on
(optional kit)
7. Agitation indicator—on
8. Spray-pump indicator—on 12. Vehicle-speed indicator
(Figure
5).
Note: The following figure is an example screen; this screen
is meant to show all of the potential icons that could appear
on the screen while operating.
Refer to the following graphic for all of the icon meanings
(Figure
5).
8
Figure 5
9. Selected-application
rate/boost-rate
indicator—on
10. Operator out of seat
11. Parking-brake indicator
(mph)
Boom-Sections Indicator
The left, right, and/or center boom sections display when any
of the boom sections are in the O
4
2
3
4
5
6
7
G035692
13. Active-application rate
(gpa)
14. Center boom-section
indicator—on
15. Left boom-section
indicator—on
position
(Figure
5).
N
Advertisement
