Advertisement
Set Rates Screen
To access the Set Rates screen, press button 2 on the Main
Menu screen
(Figure
6) until you reach Set Rates and press
button 4 to select Set Rates
This screen displays and allows you to set the Target Rate,
Rate 1, Rate 2, and the Boost-rate percentage.
To set Rate 1, Rate 2, or the Boost-rate percentage, refer to
the following:
1. Press button 1 or 2 until you reach the desired rate or
boost-rate percentage
2. Press button 4 to select or edit the rate.
3. In the screen for the selected rate, use buttons 3 and
4 to set the desired rate
Note: You can change the rate faster by pressing and
holding button 3 or 4.
(Figure
7).
(Figure
7).
Figure 7
(Figure
8).
Figure 8
Note: From the home screen, press and hold buttons
1 and 2 simultaneously to select Rate 1 or press and
hold buttons 4 and 5 simultaneously to select Rate 2.
Note: From the Home screen, press and hold buttons
1 and 5 simultaneously to apply boost rate.
Boost is active only as long as you hold buttons 1 and
5, then returns the set rate when you no longer press
and hold the buttons.
4. Press button 5 to exit the Set Rates screen, to save the
rate setting, and return to the Main screen.
Settings Screen
To access the Settings screen, press button 2 on the Main
Menu screen
(Figure
6) until you reach Settings and press
button 4 to select Settings
This screen allows you to view and change the settings for the
tank, display, boom width, and to reset default settings.
Tank Settings
1. Press button 4 on the Settings screen to select Tank
settings
(Figure
2. Press button 2 until you reach the item that you would
like to change
(Figure
3. Use buttons 3 and 4 to set the desired value
6
(Figure
9).
Figure 9
9).
10).
(Figure
10).
Advertisement
