Advertisement
Note: Volume indicates the current amount of
liquid in the tank. The low-limit setting alerts you
when the tank volume has fallen below the specified
low-limit-tank volume. This setting can be turned
on or off. You can increase or decrease agitation by
pressing buttons 3 and 4.
Display Settings
Change the units of measure as follows:
1. Press button 2 on the Settings screen until you reach
Display settings and then press button 4 to select
Display
(Figure
9).
2. Press button 1 or 2 until you reach Units and then press
button 4 to select Units.
3. Press button 1 or 2 until you reach the desired unit and
then press button 4 to select this unit.
•
English: mph, gallons, acre
•
Turf: mph, gallons, 100 ft²
•
SI (metric): kph, liter, hectare
Change the InfoCenter display backlight/contrast as follows:
1. Press button 2 on the Display settings screen until you
reach Backlight or Contrast
2. Use buttons 3 and 4 to set the desired value
Figure 10
(Figure
11).
(Figure
Change the InfoCenter protected menus as follows:
1. Press button 2 on the Display settings screen until you
reach Protected Menus, then press button 4 to select
Protected Menus
2. Press button 2 until you reach the desired protected
menu item
11).
3. Press button 4 to select and deselect each protected
menu item
7
Figure 11
(Figure
12).
Figure 12
(Figure
12).
(Figure
13).
Advertisement
