Oneida Air Systems Dust Cobra Replacing Manual page 2

Motor Brush Replacement (Continued)
To avoid damaging or denting the deflagration
4
screen underneath the motor, rest it on
supports (i.e. 2x4s) so that the screen is not
being pushed on [FIG. 4].
YOU MUST HAVE THIS PRODUCT INSTALLED BY A QUALIFIED AND LICENSED ELECTRICIAN.

IMPROPER INSTALLATION IS VERY DANGEROUS AND WILL VOID YOUR WARRANTY.
FOLLOW ALL LOCAL AND NATIONAL ELECTRICAL CODES WHEN INSTALLING THIS PRODUCT.
The brushes are located in the circled area
5
shown in [FIG. 5].
Check out the video link for instructions on
Ÿ
how to replace the motor's brushes
youtube.com/watch?v=XlTQ84vyPwo
2 Oneida Air Systems
Screen
FIG. 4
FIG. 5