Basic Configuration And Description Of Terms - Hamamatsu Photonics C10507 Series Instruction Manual

Basic configuration and description of terms

■ Measurement setup for MPPC module evaluation
Light source Optical attenuator
Power is supplied from the PC to the MPPC module via the USB cable. The PC also makes various
settings and monitors the counter value.
The counter value can also be obtained by connecting the comparator output to a frequency counter,
etc.
Connecting the analog signal to an oscilloscope allows monitoring the signal.
Analog output waveform
C10507-11-025U, C10507-11-025C, C10751-01
Analog output waveform
C10507-11-100U, C10507-11-100C, C10751-03
Optical fiber
MPPC Module
C10507-11-050U, C10507-11-050C, C10751-02
PC
Photon
Trigger signal
Analog output waveform
Comparator output waveform
< 6 >
Oscilloscope