Software Screen Configuration; Changing The Options - Hamamatsu Photonics C10507 Series Instruction Manual

【Software screen configuration】

Figure F: Screen configuration
① Shows the current count rate [kcps].
② Shows the number of input counts per gate time. (* Not in "cps" units)
③ Shows the current option settings and temperature information.
The graph is a time-series display and is updated every 100 ms.
(Measurement data is thinned out and plotted on the graph.)

【Changing the options】

To change the measurement conditions, select [Option] from the [Monitor] menu (see Figure G) or
click the button on the toolbar.
Figure G: Changing the options
< 19 >