Setup; Installing The Software - Hamamatsu Photonics C10507 Series Instruction Manual

Setup

Install software that can control the MPPC module from a personal computer (PC). The following
explains the procedure for installing the sample software using Windows XP Professional SP2. To
install the sample software, log in as a user with administrator rights. (* Always first install the
software. Do not connect the MPPC to the PC and then try to install the device driver manually
before installing the software.)

【Installing the software】

After Windows has started, insert the supplied
CD-ROM into the DVD/CD-ROM drive on the PC.
When the auto run for the CD is enabled, the installer
automatically starts. If the installer does not start,
double-click "Setup.exe" on the CD-ROM to start
the installer.
When the "Welcome" window appears, click
[Next].
The license agreement window appears. Read
through the contents carefully. If you accept the
agreement, click [Yes]. You may not install the
sample software unless you accept the terms of
the license agreement.
< 10 >