Siemens SITRANS FUP1010 Quick Start Manual page 20

Ip67 portable ultrasonic flowmeter

Hide thumbs Also See for SITRANS FUP1010:

Table of Contents

Commissioning

3.3 Setting the Parameters

Note

To set English or Metric units: In the Meter Type menu, scroll to Meter Facilities Menu.

Press <Right Arrow> and select desired units. Press <ENTER> to select. Press <Left

Arrow> and <Up Arrow> to return to Meter Type menu.

Note

To select letters: Press <Right Arrow> to cursor and then press <Up/Down Arrow> to

select letters and numbers. Press <ENTER> when done.

4. Scroll to [Save/Rename Site]. Press <Right Arrow> then press <ENTER> to save site.

5. Press the <Left Arrow> and return to the main menu.

Select Pipe Class

1. Press the <Right Arrow> to select Pipe Class. Press <Right Arrow> again and scroll to

2. Press <ENTER> to select.

3. Pre-programmed Pipe Size and relevant pipe parameters will appear in menu cells. Press

①

Insert desired name (8 characters max.)

desired Pipe Class.

<Right Arrow> and scroll to desired pipe size.

FUP1010 IP67 Portable Quick Start

Operating Instructions, 01/2013, CQO:QSG003 Revision 05

Table of Contents