Advertisement
2. Remove the cover from your computer. You may need to refer to the documentation
supplied with your computer for instructions on how to do this.
3. Locate an empty PCI bus expansion slot and remove the slot cover. Keep the screw, you
will need it later to secure the card.
4. Touch the bare metal chassis of your computer with the back of your hand to discharge
any static that may have built up on you or your clothes.
5. Align the card with the slot you have chosen. Firmly press it into the slot, as shown in the
diagram below. You will need to use some pressure to push the card into position, but do
not use excessive force.
6. Secure the card using the screw that you removed previously.
7. Replace the cover of your computer.
8. Switch on your computer and your computer monitor. You are now ready to install the
software, as explained on page 6.
Captivator PCI User Guide
- 5 -
Advertisement
