Advertisement
Captivator PCI User Guide
The Philips camera (Captivator PCI/VC only)
The high-quality Philips camera connects to the S-Video socket, which provides both audio
and video input to your computer. Follow the instructions in the camera's User Manual to set
up the camera.
Internal audio connector
The internal audio connector uses the same signal as the external audio out socket, except
that it routes sound from Captivator PCI to your sound card internally.
To connect the internal audio connector to your sound card's CD-in connector you need an
internal audio cable (part number 62575). This cable is suitable for Sound Blaster
uses Molex 70066-G or 70400-G connectors. You can order this cable from your supplier.
If your sound card does not use the same connectors as Sound Blaster, you should be able to
get your local computer supplier to make up a cable, using the details of Captivator PCI' s
audio output connector given below and the details of your sound card' s CD-in socket.
Captivator PCI uses a Molex connector, part number 70543. The pin-outs for this socket are
as follows:
Power and temperature specifications
Captivator PCI operates at a power rating of +1.0 Watts max, and Captivator PCI/VC +4.0
Watts max. Both operate at temperatures between 10ºC (50ºF) and 50ºC (122ºF).
Pin
1
1
2
2
3
3
4
4
- 12 -
Signal
Left channel
Ground
Ground
Right channel
™
, which
Advertisement
