Table of Contents
Advertisement
3. Installation
12
3. Installation
When installing this set, be sure to connect the grounding wire to the grounding
terminal of the unit. Otherwise, you may suffer an electrical shock during a failure or
leak.
Do not install this unit is exposed to direct sunlight for a long time or the temperature
rises above 55°C. Doing so may cause a fire or electrical shock. (Expect Wing
Display)
Do not place the unit on a wobbly stand or any unsteady foundation. Doing so may
cause the unit to fall resulting in injury or damage.
Do not covering for the unit. Otherwise, fire hazards or system failure can result from
the heated set.
Reasonable care must be exercised for the routing of the transducer cable, power
cable and grounding cable. Otherwise, the unit may adversely effect other equipment
or vice versa.
Hide quick links:
Advertisement
Table of Contents
