Advertisement
Quick Links
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层
1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei
Community, Fuhai Street, Bao'an District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062)
传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
http://www.godox.com
705-DP6300-00
Made In China
Instruction Manual
说
明
手
册
专业影室闪光灯
Professional Studio Flash
Chinese English Bilingual
中英文双语
Advertisement
Related Manuals for Godox DPIII Series
Summary of Contents for Godox DPIII Series
- Page 1 专业影室闪光灯 Professional Studio Flash 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 Instruction Manual 邮箱/E-mail: godox@godox.com...
- Page 2 800Ws 1000Ws 闪光能量 DPIII series studio flash provides a functional and durable lighting solution for studio and workshop shooting. It is equipped with a wireless control port so that an optional 闪光指数(m ISO 100) remote power control and flash triggering system is available. With a solid build, it 色温...
-
Page 3: Names Of Parts
Warning NAMES OF PARTS To prevent damage to the product or injury to you or to others, read the Body following warnings in their entirety before using this product. Keep these Warning where users can read them for ready reference. Do not disassemble or modify. - Page 4 LCD Panel OPERATIONS Flash Preparation 1. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and the standard reflector. (To uninstall the standard reflector, press the release PROP button on the flash head and turn the standard reflector counter-clockwise to take it 1.
- Page 5 3. When PROP is displayed, short press the < > Button can back to <OFF> Slave Trigger Model mode. Three slave triggering models are available and can be set by pressing<S1/S2> 4. When in NON OFF mode, long press the < >...
- Page 6 Setting the Communication Channel For full instructions on the use of FT series remote control, see its user manual. The Reason & Solution of Not Triggering in Godox 2.4G Wireless Long press the <GR/CH> Turn the Select Dial to choose Press the <SET>...
-
Page 7: Maintenance
Sync Cord Jack to radio communications. However, there is no guarantee that interference will not occur Parameters Output from 5V/200mA (only for Godox receiver) in a particular installation. If this equipment does cause harmful interference to radio or the USB Port...
Need help?
Do you have a question about the DPIII Series and is the answer not in the manual?
Questions and answers