Table of Contents
Advertisement
Connections
Connecting an antenna and TV
Connect your TV and the antenna to this recorder for recording and to view broadcast signals on the TV.
1
Disconnect the antenna cable from your TV, and connect it to the RF IN
(FROM ANT.) terminal on the recorder.
2
Using the supplied coaxial cable of this recorder, connect the RF OUT (TO
TV) terminal to the TV.
To RF IN (FROM ANT.)
To RF OUT (TO TV)
For connecting to a cable box or a satellite system, see
Note
• This connection ensures broadcast signals to be passed through to your TV. Unlike a VCR, you cannot assign channel 3 or 4
to playback from this recorder. The antenna input only passes through the broadcast signals to your TV.
Therefore to playback video from this recorder you must connect it to a video input on your TV. (See the next page.)
20
1
2
Coaxial cable (supplied)
e.g.
VHF/UHF antenna
Antenna cable (not supplied)
2
To antenna input
Antenna
splitter
(not supplied)
VHF/UHF
page 22 to 25.
TV
Types of an antenna terminal
may vary depending on the TV.
Check the type on your TV, and
connect properly using either
method as shown.
Advertisement
Table of Contents
