Register Description - Ebyte E22-400T30D User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
Wireless
5
configuration
6 Wrong format

7.2 Register description

Read or
Address Name
write
Read/Wr
00H ADDH
ite
Read/Wr
01H ADDL
ite
Read/Wr
02H NETID
ite
Read/Wr
03H REG0
ite
Copyright ©2012–2018，Chengdu Ebyte Electronic Technology Co.,Ltd.
E.g 2: Configure module address (0x1234), network address (0x00), serial port (9600 8N1) and air data rate
(1.2K).
Send: C2 00 04 12 34 00 61
Return: C1 00 04 12 34 00 61
Command: CF CF + normal command
Respond：CF CF + normal respond
E.g 1: Channel is 0x09
Command head command starting address length parameter
Send: CF CF C0
Returen: CF CF C1
E.g 2: Configure module address (0x1234), network address (0x00), serial port (9600 8N1) and air data rate
(1.2K).
Send: CF CF C2 00 04 12 34 00 61
Return: CF CF C1 00 04 12 34 00 61
Wrong format respond: FF FF FF
Description
ADDH（default 0）
ADDL（default 0）
NETID（default 0）
7，6，5 UART: Serial port rate（bps）
000: 1200
001: 2400
010: 4800
011: 9600（default）
100: 19200
101: 38400
110: 57600
111: 115200
---------------------------------------
4，3： Serial parity bit
00：8N1（default）
01：8O1
10：8E1
11：8N1（equal to 00）
-----------------------------------
2，1，0，air data rate
000: 0.3k
001: 1.2k
010: 2.4k（default）
011: 4.8k
05 01 09
05 01 09
The module address is high byte and low byte. Note:

When the module address is FFFF, it can be used as
the broadcast and monitor address, that is the module
will not perform address filtering.
Network address, used to distinguish the network.

When communicating with each other, they should
be set to the same.
For the two modules that communicate with each

other, the serial port baud rate can be different, and
the verification method can also be different.
When transmitting large packets continuously, users

need to consider the data blocking caused by the
same baud rate, and data may even be lost. It is
generally recommended that both parties have the
same baud rate.
---------------------------------------
Both parties must be the same

The higher the rate, the shorter the distance

E22-400T30D User Manual
Remark
15