Related Commands - H3C SOHO Series Troubleshooting Manual

Port Max Power
Port Current
Port Voltage
Port PD Description
b. Execute the poe max-power command again to configure the maximum PI power if the
current power, average power, and peak power of the port all reach or are close to the
maximum power of the port.
4. If this issue persists, contact H3C Support.

Related commands

This section lists the commands that you might use for troubleshooting PoE.
Command
display poe device
display poe interface
interface-type interface-number
display poe pse
poe legacy enable
poe max-power
: 30000 mW
: 0 mA
: 0.0 V
:
Description
Displays general PSE information.
Displays power supply information for PIs.
Displays detailed PSE information.
Enables the PSE to detect nonstandard PDs.
Sets the PI maximum power.
16