Table of Contents
Advertisement
72
Getting Started
Connecting a printer
If your printer does not support Plug and Play, you must set
up the printer as described in the
page
72.
To connect a USB printer to your computer:
1
Connect the printer cable to the printer and then connect the
other end to one of the computer's USB ports.
2
Plug the printer's power cable into a live electrical outlet.
Setting up your printer
NOTE
If your printer does not support Plug and Play, follow these
steps to set it up for the first time. You only need to set up the
printer once.
1
Click Start, Printers and Faxes.
The Printers and Faxes window appears.
2
Click Add a printer.
Some printers require a specific installation process. Refer to
your printer installation guide for instructions before
completing the following procedure.
"Setting up your printer" on
Advertisement
Table of Contents
