Table of Contents
Advertisement
56
Getting Started
Adding memory (optional)
6
Using a standard Phillips No. 1 screwdriver, unscrew the
screw that secures the memory module slot cover.
Sample unscrewing the memory module slot cover
7
Remove the memory slot cover.
8
Place the screw and the cover in a safe place so that you
can retrieve them later.
9
Remove the new memory module from its antistatic
packaging.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
Front of computer
Advertisement
Table of Contents
