Page 1 Satellite P100/P105 ® Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong”...
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and ®...
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares, that the product: PLU10* conforms to the following Standards: Supplementary *The product complies with the Information: requirements of the Low Voltage Directive 72/23/EEC, the EMC Directive 89/336/ EEC and/or the R&TTE Directive 1999/ 05/EEC.
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community 5150-5250 MHz 5250-5350 MHz...
Page 16 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland Turbo Mode (5 GHz) Canada ® Approved Countries/Regions for use for the Intel PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Bluetooth Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth Specification as defined and approved by The Bluetooth Special...
Page 19: Bluetooth Wireless Technology And Your Health
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 23 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 Dolby Laboratories. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ......40 Precautions............40 Important information on your computer’s cooling fan ..........43 Setting up your computer ........43 Setting up your software........44 Registering your computer with Toshiba ....45 Adding external devices ..........46 Connecting to a power source ........47 Using the main battery..........50...
Page 27 Contents Using the computer for the first time ......51 Opening the display panel .........51 Your computer’s features and specifications ..52 Turning on the power........52 Adding memory (optional) ........53 Installing a memory module ......54 Removing a memory module......59 ™ Using the TouchPad ..........61 ™...
Page 28 Inserting a compact disc........97 Playing an audio CD..........99 Playing CDs using Auto-Run......101 Creating a CD ..........101 Removing a disc with the computer on...102 Removing a disc with the computer off ..103 Caring for CD or DVD Discs ......103 Toshiba’s online resources ........104...
Page 29 Contents Chapter 3: Mobile Computing..........105 Toshiba’s energy-saver design......105 Running the computer on battery power ....105 Battery Notice ..........106 Power management ........107 Using additional batteries .......107 Charging batteries..........108 Charging the main battery.......108 Charging the RTC battery........109 Monitoring main battery power......110 Determining remaining main battery power ..112 What to do when the main battery runs low ...114...
Page 30 Using an ExpressCard .........144 Inserting an ExpressCard ........144 Removing an ExpressCard ......145 Using the Bridge Media Adapter Slot ....146 Inserting memory media.........146 Removing memory media.......147 Chapter 5: Toshiba Utilities............148 TOSHIBA Assist ............149 Connect............150 Secure.............150 Protect & Fix ...........151 Optimize............152 ™...
Page 31 Contents Mouse Utility............161 TOSHIBA Hardware Setup........162 TOSHIBA Zooming Utility........164 TOSHIBA Button Controls ........165 CD/DVD Drive Acoustic Silencer ......166 TOSHIBA Accessibility ..........167 Fingerprint Authentication Utility......168 Fingerprint utility limitations ......168 Fingerprint Enrollment ........168 Fingerprint Logon ...........170 Power-on Security ..........170 Control Center..........172 Password Bank ..........174 Care and maintenance of your fingerprint sensor............178...
Page 32 DVD operating problems........211 Develop good computing habits ......214 Data and system configuration backup in Windows XP ..........215 If you need further assistance.......221 Before you contact Toshiba ......221 Contacting Toshiba .........222 Other Toshiba Internet Web sites......223 Toshiba’s worldwide offices........223 Appendix A: Hot Keys..............225 Volume Mute ............225...
Page 33 Contents Appendix B: Power Cord/Cable Connectors......234 ™ Appendix C: Using ConfigFree with your Toshiba Computer............235 Getting Started............236 Starting ConfigFree .........236 ConfigFree Utilities..........238 Connectivity Doctor ........238 Search for Wireless Devices ......241 Profile Settings ..........246 ConfigFree SUMMIT........250 Quick Connect..........254 Using the Automatic Switch........257 Semi-Automatic Switch Feature ......257...
Page 34: Introduction
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you This product is compatible with European Union Directive NOTE 2002/05/EC. Restriction of the use of certain Hazardous...
Page 35 Toshiba's Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 36: This Guide
Introduction This guide This guide This guide introduces the computer’s features. You can: ❖ Read the entire guide from beginning to end. ❖ Skim through and stop when a topic interests you. ❖ Use the table of contents and the index to find specific information.
Page 37: Other Icons Used
Other documentation Your computer comes with the following documentation: ❖ An electronic version of the user’s guide ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba’s Web site at accessories.toshiba.com.
Page 38: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 181.
Page 39: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 41 Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 42 Getting Started Selecting a place to work Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card.
Page 43: Important Information On Your Computer's Cooling Fan
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked.
Page 44: Setting Up Your Software
Getting Started Setting up your computer To register your computer online or to sign up for an Internet account, you must either connect the built-in modem to a telephone line or establish a Local Area Network (LAN) connection. See “Connecting the modem to a telephone line” on page 131.
Page 45: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 46: Adding External Devices
Getting Started Adding external devices Adding external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page After starting your computer for the first time you may want ❖...
Page 47: Connecting To A Power Source
As a general safety precaution, avoid touching any metal parts. Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury.
Page 48 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adapter. Sample connecting the power cord/cable to the AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 49 Getting Started Connecting to a power source The AC power light on the indicator panel glows blue. Never tamper with the cord/cable or plug; never splice or alter a cord/cable; never bend or twist a cord/cable; never place heavy objects on a cord/cable; never place a cord/cable near a heat source;...
Page 50: Using The Main Battery
Getting Started Using the main battery ❖ Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adapter NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply.
Page 51: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right. Lift the display panel.
Page 52: Your Computer's Features And Specifications
Getting Started Using the computer for the first time Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 53: Adding Memory (Optional)
Adding memory (optional) HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process...
Page 54: Installing A Memory Module
For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer.
Page 55 Getting Started Adding memory (optional) If the computer is on, begin at step 1; otherwise, skip to step If the computer is on, click Start, Turn off (or Shut Down, depending on the system). The Turn off computer window appears. Click Turn Off.
Page 56 Getting Started Adding memory (optional) Using a standard Phillips No. 1 screwdriver, unscrew the screw that secures the memory module slot cover. Front of computer Sample unscrewing the memory module slot cover Remove the memory slot cover. Place the screw and the cover in a safe place so that you can retrieve them later.
Page 57 Getting Started Adding memory (optional) Insert the memory module into the socket on the underside of the computer. Front of computer Sample inserting the memory module into the slot Hold the memory module by its edges so that the gold connector bar faces the slot, at approximately a 45 angle to the socket.
Page 58 Getting Started Adding memory (optional) Sample aligning the module into the socket Gently press down on the memory module connector until the clips snap into place. Sample pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place.
Page 59: Removing A Memory Module
Getting Started Adding memory (optional) Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module.
Page 60 Getting Started Adding memory (optional) Pull the clips away from the memory module. The memory module pops up slightly. Gently lift the memory module to a 45 degree angle and slide it out of the slot. of computer Sample removing the memory module Replace the memory module slot cover and tighten the screw.
Page 61: Using The Touchpad
Getting Started Using the TouchPad™ Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: Click Start, Control Panel, Performance and Maintenance, and then System. The General tab view automatically appears and shows total memory.
Page 62: Scrolling With The Touchpad
Getting Started Using the TouchPad™ Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons. ™ Scrolling with the TouchPad There are two active regions on the TouchPad that allow you to scroll as you would with any wheel device on a mouse or trackball.
Page 63 Getting Started Using the TouchPad™ The TouchPAD ON/OFF tab view window appears. Sample TouchPAD ON/OFF screen Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad.
Page 64: Using The Dual Mode Pad
Getting Started Using the Dual Mode Pad Using the Dual Mode Pad (Available on certain models) The Dual Mode Pad (available on certain models), the small square cutout located in front of the keyboard, is sensitive to touch. To move the cursor, simply move your finger on the Dual Mode Pad in the direction you would like to move the cursor: ❖...
Page 65: Scrolling With The Dual Mode Pad
Getting Started Using the Dual Mode Pad Scrolling with the Dual Mode Pad There are two active regions on the Dual Mode Pad that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the Dual Mode Pad.
Page 66: Using The Virtual Buttons
Getting Started Using the Dual Mode Pad ❖ Maximize the current application ❖ Run a program of your choice Tap zones can be enabled or changed in the Mouse Properties dialog box. Using the Virtual Buttons The Dual Mode Pad has six virtual buttons and a volume control bar.
Page 67: Disabling Or Enabling The Dual Mode Pad
Getting Started Using the Dual Mode Pad Tap the virtual button assigned to the application you wish to launch, or slide your finger on the volume control bar to adjust the volume to the desired level. When the operation is complete, the Dual Mode Pad automatically disables the virtual buttons.
Page 68: Using External Display Devices
Getting Started Using external display devices Close the Control Panel window. The Fn + F9 shortcut can be used to disable or enable the Dual NOTE Mode Pad (see “Disabling or enabling the TouchPad or Dual Mode Pad” on page 232).
Page 69: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Turn on the external device. Set the display mode by pressing , or by Fn + F5 configuring the Display Properties settings. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously.
Page 70: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard Release the key. TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and click Apply or OK.
Page 71: Using A Mouse
Getting Started Using a mouse Using a mouse You may want to use a mouse instead of the computer’s built- in Dual Mode Pad. You can use a USB-compatible mouse. After logging on to your system, the mouse cursor may move NOTE to the upper-right side of the screen.
Page 72: Setting Up Your Printer
Getting Started Connecting a printer If your printer does not support Plug and Play, you must set up the printer as described in the “Setting up your printer” on page To connect a USB printer to your computer: Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports.
Page 73: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive The Add Printer Wizard appears. Sample Add Printer Wizard Follow the on-screen instructions to set up your printer. Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes.
Page 74: Turning Off The Computer
Getting Started Turning off the computer To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. Sample connecting an optional external USB diskette drive Turning off the computer Pressing the power button before shutting down the ®...
Page 75: Hibernation Mode
Getting Started Turning off the computer Turn Off or Shut Down Factors to consider when choosing either Turn Off or Shut Down: ❖ ® Use the Turn Off command if you are using Windows ® XP Home, or either Windows XP Professional or ®...
Page 76: Standby Mode
Getting Started Turning off the computer ❖ Because the state of the system is stored on the hard disk, no data is lost if the main battery discharges. ❖ When starting up again, Hibernation takes less time and consumes less main battery power than does turning off the computer.
Page 77: Using The Turn Off Computer Or Shut Down Commands
Getting Started Turning off the computer ❖ When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. If you power down using the Standby command and the main battery discharges fully, your unsaved information will be lost.
Page 78: Using And Configuring Hibernation Mode
Getting Started Turning off the computer Shut Down ® ® For Windows XP Professional or Windows XP MCE when connected to a domain server, follow these steps to turn off the computer: Click the Start button, then Shut down. ® The Shut Down Windows dialog box appears.
Page 79: Using And Configuring Standby Mode
Getting Started Turning off the computer Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Hibernation mode.
Page 80: Closing The Display Panel
Getting Started Turning off the computer The computer saves the status of all open programs and files, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Standby mode. Configuring Standby mode options You can place the computer into Standby mode by either pressing the power button or closing the display panel.
Page 81: Caring For Your Computer
Using a computer lock You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock. visit accessories.toshiba.com.
Page 82 Getting Started Caring for your computer Sample computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object.
Page 83: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 84 Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 85: Using The Keyboard
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control ® keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 86: Function Keys
For example, turns Fn+F9 off the Dual Mode Pad. For more information, see “TOSHIBA Hotkey Utility” on page 160, or “Hot Keys” on page 225. Windows special keys...
Page 87: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. ® To find the file, use My Computer or Windows Explorer.
Page 88: Starting A Program From Windows Explorer
Learning the Basics Starting a program If a program is not listed in the All Programs menu, you ® ® can start it from Windows Explorer. Windows Explorer gives you a view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.
Page 89: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program ® Windows Explorer shows the contents of the Program Files folder on the right side of the window. The left side of the window shows all the folders contained within the Program Files folder. In the left part of the window, click Windows NT.
Page 90: Saving Your Work
Learning the Basics Saving your work ❖ If you do not know the program’s location, you can search for it by clicking Start, and then Search. When the Search screen displays, follow the displayed instructions. Type WordPad in the Open text box and press Enter.
Page 91: File Names
Learning the Basics Saving your work Use this dialog box to specify where to store the document and to give it a file name. Sample Save As dialog box Choose the drive and folder where you want your file to be stored.
Page 92: Printing Your Work
Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft Word saves files with a .doc extension. Any file name with an extension of “.doc”...
Page 93: Backing Up Your Work
Learning the Basics Backing up your work The program displays a Print dialog box. Sample Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your work Back up all the files you create in case something happens to your computer.
Page 94: Restoring Your Work
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program. Look in the online Help or your operating system documentation for information on restoring files.
Page 95: Cd-Rw/Dvd-Rom Or Multi-Function Drive Components
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive For optimum DVD performance, it is recommended that you NOTE play DVDs while running the computer on AC power. CD-RW/DVD-ROM or multi-function drive components The CD-RW/DVD-ROM or multi-function drive is located on the right side of the computer.
Page 96: Media Control Buttons
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Manual eject hole—Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole.
Page 97: Inserting A Compact Disc
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Power is off or the If a CD is in the drive, the system computer is in operates as a stand-alone CD player. Hibernation mode and If a DVD is in the drive, the system you press the CD/DVD operates as a stand-alone DVD movie button...
Page 98 Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Grasp the tray and pull it fully open. Sample drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for CD or DVD Discs”...
Page 99: Playing An Audio Cd
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 100 Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Stop button Play/pause button Sample Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button. ❖...
Page 101: Playing Cds Using Auto-Run
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Playing CDs using Auto-Run If you insert a CD into the CD-RW/DVD-ROM or multi- function drive and the Auto-Run feature does not automatically start your disc, try launching the CD manually. To do this, follow these steps: Open the Start menu and select My Computer.
Page 102: Removing A Disc With The Computer On
PCs or optical media players. These problems are not due to any defect in your Toshiba PC or optical drive. Please refer to your PC's product specification for listing of specific format compatibilities.
Page 103: Removing A Disc With The Computer Off
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Gently push the tray in to close it. Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch).
Page 104: Toshiba's Online Resources
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 105: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 106: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 107: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 108: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Battery charge time may vary depending on the applications, NOTE power management settings, and features used.
Page 109: Charging The Rtc Battery
Mobile Computing Charging batteries The main battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 110: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. The RTC battery charges when the computer is powered on.
Page 111 Mobile Computing Monitoring main battery power ❖ Is unlit when the battery has discharged, the battery is not charging, or the AC adapter is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power NOTE management settings, applications and features used.
Page 112: Determining Remaining Main Battery Power
Mobile Computing Monitoring main battery power Power button On/off Main battery light light Sample power and main battery light locations Determining remaining main battery power Wait at least 16 seconds after turning on the computer before NOTE trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations.
Page 113 Mobile Computing Monitoring main battery power The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge. Sample Power Meter tab of Power Options Properties TECHNICAL NOTE: The computer drains the battery faster at low temperatures.
Page 114: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power What to do when the main battery runs low When the main battery runs low you can ❖ Plug the computer into an external power source and recharge the main battery ❖ Place the computer into Hibernation mode and replace the main battery with a charged spare ❖...
Page 115: Conserving Battery Power
Mobile Computing Monitoring main battery power To set an alarm: Click Start, Control Panel. Double-click the Power Options icon. The Power Options Properties window appears. Click the Alarms tab and set the alarm as desired. Sample Alarms tab in Power Options Properties Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as:...
Page 116: Power Schemes
Mobile Computing Monitoring main battery power ❖ Where you are working, since operating time decreases at low temperatures There are various ways in which you can conserve power and extend the operating time of your battery: ❖ Enable Standby or Hibernation, which saves power when you turn off the computer and turn it back on again ❖...
Page 117: Using A Hot Key To Set The Power Scheme
Mobile Computing Monitoring main battery power Click the Power Schemes tab and select a power scheme. Sample Power Schemes tab in Power Options Properties You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings.
Page 118: Changing The Main Battery
Mobile Computing Changing the main battery You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings. For more information, see your Windows documentation. Changing the main battery Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with...
Page 119: Removing The Battery From The Computer
Mobile Computing Changing the main battery Removing the battery from the computer To remove the battery: Save your work. Power off the computer or place it in Hibernation mode according to the instructions in “Hibernation mode” on page Unplug and remove any cables connected to the computer, including the AC adapter.
Page 120: Inserting A Charged Battery
Mobile Computing Changing the main battery Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. Sample removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Page 121 Mobile Computing Changing the main battery Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again.
Page 122: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 123: Maximizing Battery Life
Mobile Computing Taking care of your battery ❖ Do not expose the battery pack to fire. The battery pack could explode. Maximizing battery life To maximize the life of your battery pack: ❖ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 124: Disposing Of Used Batteries
Mobile Computing Disposing of used batteries ❖ If you are not going to use the computer for more than eight hours, disconnect the AC adapter. ❖ Store spare battery packs in a cool dry place out of direct sunlight. Disposing of used batteries The life of a battery pack depends on usage.
Page 125: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information.
Page 126: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in ® the Windows XP operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 127: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Taskbar System tray Start button ® Sample Windows XP operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 128 Exploring Your Computer’s Features Exploring the desktop TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help. ® Internet Explorer — The Microsoft browser that provides access to the Internet.
Page 129: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 130 Exploring Your Computer’s Features Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 131: Connecting The Modem To A Telephone Line
Exploring Your Computer’s Features Setting up for communications Click OK to close the properties dialog box for that specific modem. Click OK to close the Modem Properties dialog box. Close the Control Panel. Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line.
Page 132: Connecting Your Computer To A Network
Now you are ready to send a fax or use the modem to connect to an online service or the Internet. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.
Page 133 Exploring Your Computer’s Features Setting up for communications Using the Ethernet LAN Port When your computer starts, Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply.
Page 134: An Overview Of Using The Internet
Exploring Your Computer’s Features An overview of using the Internet Using Wireless LAN Connectivity Wireless connectivity and some features may require you to NOTE purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited.
Page 135: The Internet
Exploring Your Computer’s Features An overview of using the Internet ❖ Surfing the Internet ❖ Internet features ❖ Uploading to, and downloading files from, the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines.
Page 136: Connecting To The Internet
Exploring Your Computer’s Features An overview of using the Internet Connecting to the Internet To connect to the Internet, you need: ❖ A modem and telephone line, or a LAN connection ❖ A Web browser ❖ An Internet Service Provider (ISP) account ®...
Page 137: Internet Features
Exploring Your Computer’s Features An overview of using the Internet You can also use a Search Engine, a Web site specifically designed to help you look for information. Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖...
Page 138: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 139: Using A Microphone
Exploring Your Computer’s Features Exploring audio features Using a microphone Connect an external microphone to the computer. Click Start, All Programs, Accessories, Entertainment, and then Sound Recorder. Positioning Record Stop Play Skip forward Skip backward Sample Sound Recorder screen Click the Record button. Speak normally into the microphone.
Page 140: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect an external audio device to one of the jacks on the front of the computer.
Page 141: Using The I.link ® Port
Exploring Your Computer’s Features Using the i.LINK® port To play back sound files through external speakers or headphones: Locate the headphone or audio out jack on the front of the computer. Using any necessary adapters, plug the cable from the headphones or external speakers into the jack.
Page 142: Inserting A Pc Card
Exploring Your Computer’s Features Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. Inserting a PC Card Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before...
Page 143: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards Removing a PC Card Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Page 144: Using An Expresscard
Exploring Your Computer’s Features Using an ExpressCard™ Using an ExpressCard™ The ExpressCard slot supports the use of ExpressCard media. The slot also supports hot swapping, which allows you to replace one ExpressCard with another while the computer is Inserting an ExpressCard Before you insert an ExpressCard, refer to the documentation that comes with the card to see if you need to do anything before you insert it.
Page 145: Removing An Expresscard
Exploring Your Computer’s Features Using an ExpressCard™ Removing an ExpressCard Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Page 146: Using The Bridge Media Adapter Slot
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Using the Bridge Media Adapter Slot The Bridge Media Adapter Slot supports the use of Memory Stick or Memory Stick PRO media, Secure Digital ) Cards, MMC (MultiMedia Card), or xD-Picture Cards.
Page 147: Removing Memory Media
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Removing memory media Prepare the media for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the media for safe removal, a message will tell you to try again later.
Page 148: Chapter 5: Toshiba Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ TOSHIBA Assist ❖...
Page 149: Toshiba Assist
TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the TOSHIBA Assist shortcut icon on the desktop.
Page 150: Connect
ConfigFree ❖ Bluetooth Settings (available on some models) ® ❖ Bluetooth Local COM Settings (available on some models) Sample TOSHIBA Assist – Connect tab Secure The features available in this category are: ❖ User password ❖ Supervisor password ❖ TOSHIBA Password Utility...
Page 151: Protect & Fix
Toshiba Utilities TOSHIBA Assist Sample TOSHIBA Assist window – Secure tab Protect & Fix The feature available in this category is: ❖ PC Diagnostic Tool Utility Sample TOSHIBA Assist window – Protect & Fix tab...
Page 152: Optimize
The features available in this category are: ❖ TOSHIBA SD™ Memory Card Format Utility ❖ Mouse Utility ❖ TOSHIBA Accessibility ❖ TOSHIBA Zooming Utility ❖ TOSHIBA Button Controls ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Hardware Setup Sample TOSHIBA Assist window – Optimize tab...
Page 153: Toshiba Sd Memory Card Format Utility
This utility is used to format SD cards used with the Bridge Media Adapter Slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, SD Memory Card Format utility, or double-click the SD Memory Card icon in the Optimize tab of TOSHIBA Assist.
Page 154: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and files when leaving the computer temporarily (the user password supports this function).
Page 155: Using A Supervisor Or User Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 156: Deleting A Supervisor Password
Type the correct password. Click OK. Setting a user password If you choose to set a user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 157: Toshiba Password Utility
Select the User Password icon. Select Not Registered. Type the correct password. Click OK. TOSHIBA Password Utility The TOSHIBA Password Utility allows you to set a user- level password in TOSHIBA Assist or in System Setup. To use the TOSHIBA Password utility: Start TOSHIBA...
Page 158 Toshiba Utilities TOSHIBA Password Utility Click the Secure tab, then double-click the User Password icon. The TOSHIBA Password Utility window appears. Sample TOSHIBA Password Utility window Click Set Enter a password, then enter it again to verify. Click Set Click OK if you want to save the password to a text file on a diskette or media of your choice.
Page 159: Pc Diagnostic Tool Utility
Toshiba Utilities PC Diagnostic Tool Utility If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 160: Toshiba Hotkey Utility
Click Start Diagnostics when you are ready to begin the tests. TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ ] and Hibernation [...
Page 161: Mouse Utility
Toshiba Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: Click Start, Control Panel, Mouse, or double-click the Mouse icon in the Optimize tab of TOSHIBA Assist.
Page 162: Toshiba Hardware Setup
Optimize tab of TOSHIBA Assist. The TOSHIBA HW Setup screen appears. Sample TOSHIBA HW Setup screen – Password tab options The TOSHIBA HW Setup screen has the following tabs: ❖ General—Allows you to view the current BIOS version or change certain settings back to their default values.
Page 163 Toshiba Utilities TOSHIBA Hardware Setup ❖ Display—Allows you to change various default settings for the built-in LCD display When the computer restarts, it remembers the last NOTE configuration. If data does not appear on the display you are using after starting in Standby Mode, press Fn + F5.
Page 164: Toshiba Zooming Utility
Adobe Reader ❖ Icons on the desktop To access the Zooming utility: Click Start, All Programs, Toshiba, Utilities, TOSHIBA Zooming Utility, or double-click the Zooming Utility icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA Zooming Utility Properties screen appears.
Page 165: Toshiba Button Controls
To zoom in, hold down the key and press ; to zoom out, hold down the key and press For more information about how to use the TOSHIBA Zooming utility, right click the icon in the taskbar and then click Help. TOSHIBA Button Controls The TOSHIBA Button Controls allow you to customize the TOSHIBA Assist and TOSHIBA Presentation buttons.
Page 166: Cd/Dvd Drive Acoustic Silencer
Toshiba Utilities CD/DVD Drive Acoustic Silencer Select the button whose function is to be customized. Make the desired selections. Click Apply, then click OK. CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly.
Page 167: Toshiba Accessibility
Click Set Normal Mode to run the drive at normal speed, for transferring data. TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 168: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 169 Toshiba Utilities Fingerprint Authentication Utility Enter your credentials. Complete the fingerprint tutorial. Click the button above the finger you want to enroll. Swipe your finger on the sensor. A sample will be created and indicated by a fingerprint icon. Repeat the previous step. Swipe the same finger on the sensor two more times to create two more samples.
Page 170: Fingerprint Logon
Toshiba Utilities Fingerprint Authentication Utility ❖ Error reading fingerprint—the finger was too far to the left or right. Center your finger and swipe it again. ❖ Error reading fingerprint—the movement was skewed. Swipe your finger again in a straight line.
Page 171 Toshiba Utilities Fingerprint Authentication Utility If the authentication fails, the system tries again up to two more times. If authentication fails after the third attempt, the system shuts down. Enabling Power-on Security Options for power-on security are displayed only if your computer supports this feature.
Page 172: Control Center
Toshiba Utilities Fingerprint Authentication Utility Fingerprint Management Fingerprints are stored in memory during enrollment. After a finger is enrolled, it is displayed with a power-on button above it. The button appears “pressed in” by default, indicating that the corresponding finger will be used for power-on security.
Page 173 Toshiba Utilities Fingerprint Authentication Utility Settings ❖ System Settings—Opens the Settings dialog containing various options for setting up the product. Most of these settings can be modified only by administrators and affect all users. ❖ User Settings—Opens the User Settings dialog containing user-specific options for setting up the product.
Page 174: Password Bank
Toshiba Utilities Fingerprint Authentication Utility Password Bank The Password Bank stores registration and logon information for Web sites and dialogs, helping to automate the task of entering this information. You enter the required information only once, during Web page or dialog registration. When the window is displayed again, all the data is entered automatically when you scan your fingerprint on the sensor.
Page 175 Toshiba Utilities Fingerprint Authentication Utility Registering a new Web page or dialog You are logged on to the computer and want to register a new Web page. To create a new registration: Display a Web page you want to register.
Page 176 Toshiba Utilities Fingerprint Authentication Utility Replaying registrations with multiple forms Password Bank registers forms, not pages. If a page contains several forms, each form requires a separate registration. If a page contains several forms, replaying works as follows: ❖ If only one form is registered for the page (regardless of how many forms the page has), that registration is replayed.
Page 177 Select a registration. Click Delete. How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory. If the computer changes ownership, Toshiba recommends the following procedure: Click Start, All Programs, Protector Suite QL then click Control Center.
Page 178: Care And Maintenance Of Your Fingerprint Sensor
Toshiba Utilities Fingerprint Authentication Utility If other fingerprint data is still displayed on the list, hold down the key and select each fingerprint until they Control are all selected, then click Remove. Click OK to make the changes permanent. Check that all Fingerprint data was deleted on the Fingerprint Storage Inspector screen.
Page 179 Toshiba Utilities Fingerprint Authentication Utility ❖ Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. ❖ Soaked or swollen finger (e.g. after taking bath) ❖...
Page 180: Fingerprint Sensor Limitations
Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 181: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 182 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 183: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press simultaneously to copy the text to the Ctrl...
Page 184 If Something Goes Wrong Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
Page 185: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 186: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 187: Internet Problems
If Something Goes Wrong The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 188: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 189: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 190: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: ❖...
Page 191 If Something Goes Wrong Resolving a hardware conflict Disabling a device Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category.
Page 192: Memory Problems
If Something Goes Wrong Resolving a hardware conflict The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: ❖ The General tab, which provides basic information about the device. ❖ The Resource tab, which lists resources assigned to the monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions.
Page 193: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
Page 194 If Something Goes Wrong Resolving a hardware conflict The AC adapter and power cord/cable work correctly, but the battery will not charge. The battery does not charge while the computer is consuming full power. Try turning off the computer. The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery.
Page 195: Keyboard Problems
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. Refer to this site often to stay current on the most recent software and hardware options for your computer, and for other product information.
Page 196: Display Problems
If Something Goes Wrong Resolving a hardware conflict Nothing happens when you press the keys on the external keyboard. You may have plugged the external keyboard in while the computer was turned on. Click Start, Shut Down or Turn off computer, and Restart the computer using the Dual Mode Pad on the internal keyboard.
Page 197 If Something Goes Wrong Resolving a hardware conflict ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Press simultaneously to make sure the display priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties.
Page 198: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 199 If Something Goes Wrong Resolving a hardware conflict Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. On the pop-up menu, click Properties.
Page 200 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software.
Page 201: Cd-Rw/Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict CD-RW/DVD-ROM or multi-function drive problems You cannot access a disc in the drive. If the CD-RW/DVD-ROM or multi-function drive is an external drive, make sure that the drive’s cable is properly connected to the computer. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly.
Page 202: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict Some discs run correctly but others do not. Check the type of disc you are using. The CD-RW/ DVD-ROM or multi-function drive supports the Digital Versatile Disc (DVD) formats DVD-ROM, DVD-R (read- only), plus CD-ROM, CD-R (read-only), and CD-RW (read- only).
Page 203: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards. If you are having trouble getting one or more of these devices to work together, several sections in this chapter may apply.
Page 204 If Something Goes Wrong Resolving a hardware conflict PC Card checklist ❖ Make sure the card is inserted properly into the slot. ❖ Make sure all cables are securely connected. ❖ Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine.
Page 205 If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address.
Page 206: Printer Problems
If Something Goes Wrong Resolving a hardware conflict A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
Page 207: Modem Problems
Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com...
Page 208: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 209 If Something Goes Wrong Resolving a hardware conflict ❖ Check Control Panel's Device Manager to verify that the ® Wi-Fi adapter is recognized by Windows , and that the driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 210 If Something Goes Wrong Resolving a hardware conflict ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖...
Page 211: Dvd Operating Problems
If Something Goes Wrong DVD operating problems The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
Page 212 “Checking device properties” on page 191 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 213 If Something Goes Wrong DVD operating problems Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: Right-click the Desktop, select Properties.
Page 214: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 215: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Your local computer store or book store sells a variety of self- help books you can use to supplement the information in the manuals. Data and system configuration backup in Windows XP Windows XP offers some easy-to-use features for backing up your Windows settings and your data –...
Page 216 If Something Goes Wrong Develop good computing habits Windows creates the Restore Point and automatically stamps it with the current date and time. Then, at a later time, you can re-establish your Windows configuration using the saved Restore Point. To do this: Click Start.
Page 217 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 218 If Something Goes Wrong Develop good computing habits NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖...
Page 219 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear.
Page 220 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office or utility software such as special toolbars for your Web browser).
Page 221: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your operating system documentation.
Page 222: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 223: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site computers.toshiba.com...
Page 224 Spain United States The Rest of Europe Toshiba America Information Toshiba Europe (I.E.) GmbH Systems, Inc. Hammfelddamm 8 9740 Irvine Boulevard D-4-1460 Neuss Irvine, California 92618 Germany United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.
Page 225: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 226: Password Security
Hot Keys Password security Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 227: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security If you clicked Choose a screen saver, the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 228: Power Usage
Hot Keys Power usage Power usage This hot key displays the Power Schemes tab of the Power Options Properties window. Sample Power Schemes tab in Power Options You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings.
Page 229: Standby Mode
Hot Keys Standby mode Standby mode This hot key places the computer into Standby mode. ❖ A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box. Sample Standby confirmation box ❖...
Page 230: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. ❖ If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box.
Page 231: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: ❖ Built-in display only ❖ Built-in display and external monitor simultaneously ❖ External monitor only ❖ ❖ TV and built-in display ❖...
Page 232: Display Brightness
Zooming applications in/out This hot key turns the Zooming utility to zoom- out. For more information, see “TOSHIBA Zooming Utility” on page 164. This hot key turns the Zooming utility to zoom-in. For more information, see “TOSHIBA Zooming Utility” on page 164.
Page 233: Keyboard Hot Keys
Hot Keys Keyboard hot keys Keyboard hot keys This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi antenna on-off switch is in the on position.) This hot key switches screen or video modes. [Spacebar]...
Page 234: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved Australia...
Page 235: Appendix C: Using Configfree
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 236: Getting Started
❖ Double-click the ConfigFree icon on the taskbar. ❖ Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. ❖ Click the ConfigFree icon on the taskbar, and then...
Page 237 Using ConfigFree™ with your Toshiba Computer Getting Started If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 238: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 239 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 240 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 241: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the icon in the system tray.
Page 242 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities The Search for Wireless Devices feature identifies if a device is IEEE 802.11a, b, or g. It also includes an option to display hidden access point availability. Sample viewing Wi-Fi devices Creating a new wireless connection...
Page 243 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging a device to the Access Point Sample Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 244 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 245 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 246: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth device To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 247 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network. Similarly, users who access networks in the office and at home can set up profiles to handle these networking environments.
Page 248 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Enter any optional comments, if desired. Click Change Icon and select an icon for this profile. Click the icon at the bottom of the screen to display more capture options. Under Captured Items, select the items you want to capture for this profile.
Page 249 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 250: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 251 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon.
Page 252 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of sharing a file with one user ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired.
Page 253 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the icon in the system tray.
Page 254: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re-...
Page 255 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities To review the current Toshiba Wireless Projector settings and change them if necessary: Click the icon in the system tray. Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears.
Page 256 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 257: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 258 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature To use the Semi-Automatic Switch feature: Right-click the icon in the system tray. Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add.
Page 259: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS...
Page 260 Glossary direct current direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission hard disk drive...
Page 261 Glossary real-time clock SCSI small computer system interface DDRAM double data random access memory SRAM static random access memory SVGA super video graphics adapter thin film transistor universal serial bus uniform resource locator wide area network World Wide Web Terms These terms may appear in this user’s guide.
Page 262 Glossary backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS) — See BIOS. baud rate — The speed at which a communication device, such as a printer or modem, transmits information.
Page 263 Glossary CD-ROM (compact disc read-only memory) — A form of high- capacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM. central processing unit (CPU) — The chip that functions as the “brain” of the computer.
Page 264 Glossary CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor —...
Page 265 Glossary disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data.
Page 266 Glossary executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities.
Page 267 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 268 Glossary Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as the Dual Mode Pad.
Page 269 Glossary microprocessor — See central processing unit (CPU). MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem —...
Page 270 Glossary palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device.
Page 271 Glossary RAM (random access memory) — Volatile memory that can be written to as well as read. By volatile, we mean that information in RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory. Compare ROM.
Page 272 Glossary software — See program. Compare hardware. ® Standby — A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again.
Page 273 Glossary Web — See World Wide Web. Wi-Fi — A trademarked term by the Wi-Fi Alliance which stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet.
Page 274: Index
53 real-time clock (RTC) 107 adding external devices 46 removing 119 adding memory 53 BIOS Setup adjusting recording quality 139 see TOSHIBA Hardware Setup Alt keys 85 Bridge Media slot 146 audio button .wav files 138 power 53 audio features 138...
Page 275 Index IRQ 189 mouse 71 character keys 85 Disk Defragmenter 199 charging the battery 50 disk drive checking device properties 191 corrupted/damaged data files click 62 communications missing files/trouble accessing network connection 132 a disk 198 system resources 189 running slow 199 compact disc positioning 98 disk light 74 compact discs...
Page 276 Index DVI video port 68 backing up 93 printing 92 restoring 94 environment saving 90 computer-friendly 39 Fingerprint Authentication Utility error messages device driver conflict 188 Fn keys 85 general hardware problem 188 function keys 86 non-system disk or disk error problem with display settings/ hard disk light 74 current...
Page 277 Index moving to desktop 127 recycle bin 127 light safety 36 drive in-use indicator 95 Industry Canada requirement 4 installation memory module 54 main battery installing removing 119 memory modules 53 Main battery light 49 mouse 71 memory instant passwords, using 154 adding 53 Internet expansion slots 54...
Page 278 PC Card problem solving 203 inserted 205 removing 143 computer will not power up 183 setting up 143 contacting Toshiba 221 Plug and Play 189 corrupted/damaged data files port COM 130 Device Manager 190 Ethernet LAN 133...
Page 279 Index high-pitched noise 202 illegal operation 182 real-time clock (RTC) battery 107 Internet bookmarked site not recording found 187 .wav files 138 Internet connection is slow 187 sounds 138 keyboard recording quality 139 not responding 184 recording sounds 138 missing files/trouble accessing recycle bin icon 127 a disk 198 registering computer 45...
Page 280 Toshiba problem solving 185 registering computer 45 Windows XP Professional desktop worldwide offices 223 Toshiba Assist 149 wireless Toshiba Hardware Setup 162 antenna switch 134 Toshiba online resources 104 indicator light 134 Toshiba utilities 148 interoperability 7 traveling tips 125...

This manual is also suitable for:

P105 s6217 - satellite - core 2 duo 1.66 ghz P105-s9337 - satellite - core 2 duo ghz Satellite p100 series Satellite p105 series

Toshiba P105 S6197 - Satellite - Core 2 Duo 1.6 GHz User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree

Quick Links

Related Manuals for Toshiba P105 S6197 - Satellite - Core 2 Duo 1.6 GHz

Summary of Contents for Toshiba P105 S6197 - Satellite - Core 2 Duo 1.6 GHz