Table of Contents
Advertisement
2
Enter your credentials.
3
Complete the fingerprint tutorial.
4
Click the button above the finger you want to enroll.
5
Swipe your finger on the sensor.
A sample will be created and indicated by a fingerprint icon.
6
Repeat the previous step. Swipe the same finger on the
sensor two more times to create two more samples.
7
The final template will be created from these three
samples.
NOTE
If you do not use a Windows password, you will be prompted
to define a new (non-empty) one. This is not necessary, but a
password improves the security of your software.
If your system supports power-on security, a Power-on button
is also displayed above each enrolled fingerprint. This button
is shown pressed by default, indicating that your finger is
automatically added for power-on authentication.
During fingerprint enrollment, the system displays icons as
prompts, notifications, and warnings. These icons and their
meanings are as follows:
Sensor ready. The sensor is waiting to read your
fingerprint. Swipe your finger when you are ready.
Sensor busy. Wait for the sensor to complete its
operation.
Problem with operation. The sensor could not read your
fingerprint. Swipe your finger again.
Operation succeeded. The sensor successfully read or
verified your fingerprint.
Failed to verify the user. The fingerprint could not be
matched.
Fingerprint Authentication Utility
Toshiba Utilities
169
Advertisement
Table of Contents
