Table of Contents
Advertisement
Using the CD-RW/DVD-ROM or multi-function drive
3
Gently push the tray in to close it.
Removing a disc with the computer off
1
Insert a slender object, such as a straightened paper clip, into
the manual eject hole.
The disc tray slides partially out of the drive (about 1
inch).
2
Pull the tray out until it is fully open, remove the disc,
and place it in its protective cover.
3
Gently push the tray in to close it.
Caring for CD or DVD Discs
Store your discs in their original containers to protect
them from scratches and keep them clean.
Do not bend a disc or place heavy objects on top of it.
Do not apply a label to or otherwise mar the surface of a
disc.
Hold a disc by its outside edge. Fingerprints on the
surface can prevent the CD-RW/DVD-ROM or multi-
function drive from reading the data properly.
Do not expose discs to direct sunlight or extreme heat or
cold.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
Learning the Basics
103
Advertisement
Table of Contents
