Table of Contents
Advertisement
SPECIFICATION OF PV CHARGE CONTROLLER
automatically operation. With the features of PWM (Pulse Width
Modulation) battery charging and unique control technology, the PV
charge controller improves battery life efficiently. The PV charge
controller is only suitable for controlling solar modules. Never
connect any other types of charging source to the controller. This
can destroy the controller and/or the charging source permanently.
CAUTION: The controller is only suitable for indoor use or well
waterproof environment. It must be installed in a manner providing
protection from weathering influences such as rain and direct
sunlight. Ventilation openings must not be covered. The controller
may only be used for the specified intended purpose. Please also
ensure that the permissible model-specific rated currents and
voltages are not exceeded. No liability is accepted when the device
is used in a manner other than for the intended purpose. Handle the
product with care.
2.1 Performance feature
➢
Industrial-grade chips ensure stable performance.
➢
Excellent EMC design
➢
PWM technology has three charging stages (buck charging,
equalize charging and float charging) which improves the
charging efficiency and battery storage capability.
➢
Advanced battery activation technology which increases
battery lifetime 30% at least and improves the system
performance
➢
It adopts imported MOSFET as electronic switch which
can improve the stable performance of controller.
➢
3'' LCD displays the system status and working parameters
➢
Parameters setting flexibly by touching keys
➢
Users can parallel connect lots of t controllers in a system
➢
DC output function
➢
2 USB outputs
➢
Standard Modbus protocol for RS-485 or GPRS
3
Advertisement
Table of Contents
