Table of Contents
Advertisement
SPECIFICATION OF PV CHARGE CONTROLLER
1. Safety Instructions
1.1 Safety instructions are identified as follows
WARNING: This symbol indicates potentially dangerous
condition. Users should pay extreme caution when performing
this task.
CAUTION: This symbol indicates critical procedure for safe
and proper operation of the controller
NOTE: This symbol indicates the procedure or function that is
important for safe and proper operation of the controller.
1.2 Safety Precautions
1.2.1 Read all the instructions and cautions in the manual
1.2.2 There are no serviceable parts inside the controller, so do
1.2.3 Please avoid direct sunlight if you install it outdoor.
1.2.4 Install external fuses/breakers as required.
1.2.5 Install the controller in well ventilated places, the
1.2.6 Keep the controller away from water, electrical heater and
1.2.7 Disconnect PV arrays and battery before install or adjust
1.2.8 Power connections must remain tight to avoid excessive
1.2.9 Be sure to always keep children away from the system.
1.2.10 Do not use measurement equipment you know to be
1.2.11 Avoid the generation of sparks and wear eye protection
1.2.12 The manual must also be available to third parties for all
before installation.
not disassemble or attempt to repair it without authority
from manufacturer.
controller heatsink may become very hot during
operation.
avoid the controller from direct sunlight.
the controller.
heating from loose connection.
damaged or defective.
during installation.
1
Advertisement
Table of Contents
