Network Module Pairing; Ⅰpreparing For Network Module Pairing; Ⅱwireless Network Module Plug & Play Precautions; Ⅲhow To Pair Network Modules - Luxrobo Modi User Manual

Network module pairing

ⅠPreparing for Network Module Pairing
➊ The Display module is not available for Plug & Play through the Network modules.
➋ We recommend using Network module pairing in environments where there are
not many other wireless signals.
➌ All modules to be used should be reset first.
ⅡWireless Network Module Plug & Play Precautions
The Display module is not available for Plug & Play through wireless networks.
Plug & Play is not available for modules which have not been reset.
Interference may be experienced in places where there are numerous WiFi signals.
If two Network modules that are pairing are separated when their LED status lights are still blinking,
they may not work properly.
ⅢHow to Pair Network Modules
➊ Prepare two Network modules and provide power to each module.
(At this time, the Network modules should not communicate with other external devices.)
➋ Connect the Network modules and check to see if they both have a blinking blue LED status light.
Network module pairing
MODI
18