Advertisement
Important Safety Information
•
Safety Precautions
Translated versions of the following safety warnings are provided in the Safety Warnings document that
ships with the access point and is also available on Cisco.com.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. Use the statement number provided at
the end of each warning to locate its translation in the translated safety warnings that
accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
Read the installation instructions before connecting the system to the power source. Statement
1004
This product relies on the building's installation for short-circuit (overcurrent) protection.
Warning
Ensure that the protective device is rated at not greater than 20A. Statement 1005
Only trained and qualified personnel should be allowed to install, replace, and service this
Warning
equipment. Statement 1030
Ultimate disposal of this product should be handled according to all national laws and
Warning
regulations. Statement 1040
To prevent the system from overheating, do not operate it in an area that exceeds the maximum
Warning
recommended ambient temperature of: 131F (55C) Statement 1047
Warning
Installation of the equipment must comply with local and national electrical codes. Statement
1074
Cisco Aironet Series Console Adapter Cable AIR-CONSADPT= Guide
4
Read the installation instructions before connecting the console adapter to the console port on the
Cisco Aironet device.
Advertisement
