Page 1
Cisco Aironet Series Console Adapter Cable AIR-CONSADPT= Guide This document provides information and instructions for using the Cisco Aironet Series Access Point Console Adapter Cable AIR-CONSADPT= (referred to as the console adapter in this document). This document contains the following information: Product Overview, page 2 •...
RJ-45 (RS-232) to 4-pin (3.3V TTL) console adapter The console adapter is used to connect the RS-232 to RJ-45 console cable to Cisco Aironet access points and sensors that use the 4-pin console port as identified in their respective guides.
The console adapter’s Ethernet (RJ-45) port is a shielded RJ45 data socket and cannot be used as a Plain Old Telephone Service (POTS) socket. Only RJ45 console RS-232 connectors can be used with this. Cisco Aironet Series Console Adapter Cable AIR-CONSADPT= Guide...
Cisco Aironet device. Safety Precautions Translated versions of the following safety warnings are provided in the Safety Warnings document that ships with the access point and is also available on Cisco.com. Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.
Page 5
The console adapter has an RJ-45 port on one end (Figure 1) and a 4-pin connector (Figure 2) on its other end. Figure 1 RJ-45 Port on the Console Adapter Figure 2 4-pin Connector on the Console Adapter Cisco Aironet Series Console Adapter Cable AIR-CONSADPT= Guide...
Page 6
Console port on Cisco Aironet device The console port may be found in different locations on different products. Refer to the Note documentation for your Cisco Aironet device to locate its console port. Cisco Aironet Series Console Adapter Cable AIR-CONSADPT= Guide...
Need help?
Do you have a question about the AIR-CONSADPT and is the answer not in the manual?
Questions and answers