Operating A Computer By The Remote Control; Usb Connector - Toshiba TLP790 Owner's Manual

Operating a computer by the remote control

You can control a computer by the remote control when the projector and computer are connected with the supplied USB cable. In this manual,
this function is explained as "mouse remote control".
USB MONITOR
OUT
CONTROL
Notes
• This function is available on any computer with the Windows 98/98SE, Windows Me, Windows 2000, Windows XP or Mac OS9 that is equipped with a
USB port which can support USB1.1. However, please note that Toshiba does not guarantee the operation of all computers.
• When connecting to the computer's USB port for the first time, a message asking you to insert the Windows98 CD-ROM may appear on the computer's
monitor screen, depending on whether or not the device driver is installed. If so, do as the message says.
• When using a USB cable other than the supplied one, be sure to use a shielded type.
Remote control
INPUT INPUT
KEYSTONE KEYSTONE
COMPUTER IN 1 COMPUTER IN 2
( Y/P )
B /P R
VIDEO IN
AUDIO
IN R - AUDIO - L VIDEO S-VIDEO
L-CLICK
MENU MENU
PIP PIP
CALL CALL
USB cable (supplied)
To USB connector
Be sure to connect in the proper
direction.
Point the remote control at the remote control
sensor on the projector when operating its buttons.
ON/STANDBY ON/STANDBY • To move the pointer
LASER LASER
Press the outer side of the pointer control button
AUTO AUTO
SET SET
in the direction in which you want to move the
pointer. (The speed at which the pointer moves
Pointer control
depends on how strongly the button is pressed.)
• To click
R-CLICK
Press L-CLICK or the center of the pointer
R-CLICK
control.
L-CLICK
VOLUME/ADJUST VOLUME/ADJUST
• To right-click
Press R-CLICK.
• To drag and drop
While holding down the center of the pointer
ENTER ENTER EXIT EXIT
control, press the rim side to move the pointer to
FREEZE FREEZE
the desired spot, then release the center part.
RESIZE RESIZE
MUTE MUTE
Computer
To USB port
42
CONTENTS