Connecting A Capture Drive Dock; Loading And Unloading A Capture Drive From The Dock - Codex CDX-36150 Manual

CDX-36150 Recorder - Getting Started Guide v1.1
9 Connecting a Codex Capture Drive 2.0 Dock
10
THUNDERBOLT PORTS DC POWER SUPPLY
Connect the included DC power supply to the DC IN connector of the Capture Drive 2.0 Dock. There
are two Thunderbolt Ports available - connect one to a Mac computer that has the required Codex
software installed.
The other Thunderbolt port can be used to connect to other Thunderbolt devices, such as a monitor or
storage.

9.1 Loading and unloading a Capture Drive from the Dock

Insert a Codex Capture Drive into the Dock and it will begin loading automatically. During this time the
LED will flash blue. When it is loaded the LED will flash green, and this typically takes 5-10 seconds.
CODEX CAPTURE DRIVE 2.0 DOCK WITH MOUNTED CAPTURE DRIVE 2.0
The LED on a Capture Drive flashes green quickly when it is reading/writing data. Do not unload a
Capture Drive when it is reading/writing as this can compromise data integrity.
To unload, press the eject button on the end of the Capture Drive or go to the Storage screen of Codex
Production Suite (/Applications/Codex/Vault Platform->Storage), click to select the media, and click the
Wrench->Eject button. The LED will flash blue while it unloads. When the LED is solid blue it is safe to
remove the Capture Drive.
Always eject the Capture Drive correctly before removing it from the Dock.