Purpose; General Requirements, Warnings And Limitations; General Fall Protection Warnings - Miller Vi-Go User Instruction Manual

Thank You
Thank you for your purchase of Miller Fall Protection equipment. Miller brand products are produced to meet the
highest standards of quality at our ISO 9001:2000 certified facility. Miller Fall Protection equipment will provide
you with years of use when cared for properly.
All persons using this equipment must read, understand and follow all instructions.
Failure to do so may result in serious injury or death. Do not use this equipment
unless you are properly trained.
Questions?
It is crucial that the authorized person/user of this fall protection equipment read and understand these instruc-
tions. In addition, it is the employer's responsibility to ensure that all users are trained in the proper use, inspec-
tion, and maintenance of fall protection equipment. Fall protection training should be an integral part of a compre-
hensive safety program.
Proper use of fall arrest systems can save lives and reduce the potential of serious injuries from a fall. The user
must be aware that forces experienced during the arrest of a fall or prolonged suspension may cause bodily injury.
Consult a physician if there is any question about the user's ability to use this product. Pregnant women and
minors must not use this product.
1.0 Pur pose
Vi-Go Vertical Cable Lifeline Systems are innovative climbing and fall arrest systems that provide superior fall
protection for fixed ladder applications.
2.0 General Requirements, War nings and Limitations

2.1 General Fall Protection Warnings

All warnings and instructions shall be provided to
authorized persons/users. Warnings and instructions
must be read and understood prior to using this
equipment.
All authorized persons/users must reference the
regulations governing occupational safety, as well
as applicable standards (i.e, ANSI or CSA). Refer to
product labeling for information on specific OSHA
regulations, and ANSI and CSA standards met by
this system.
Proper precautions should always be taken to remove
any obstructions, debris, material, or other recognized
hazards from the work area that could cause injuries or
interfere with the operation of the system.
All equipment must be inspected before each use
according to the manufacturer's instructions.
actoolsupply.com
Us er Instr ucti on s - E ngl ish
WARNING
All equipment should be inspected by a qualified person
on a regular basis.
To minimize the potential for accidental disengagement,
a competent person must ensure system compatibility.
Equipment must not be altered in any way. Repairs
must be performed only by the equipment manufacturer,
or persons or entities authorized, in writing, by the
manufacturer.
Any product exhibiting deformities, unusual wear, or
deterioration must be immediately discarded.
Do not use if the unit or any part of the system appears
to be damaged.
Any equipment subject to a fall must be removed from
service.
3
actoolsupply.com