Optional Vi-Go Anchorage Connector; System Operation; Training - Miller Vi-Go User Instruction Manual

5.7 Optional Vi-Go Anchorage Connector

TRS-AC2

6.0 System Operation

1. Don a Miller full-body harness according to the manufacturer's instructions.
2. Install the Vi-Go Cable Sleeve to the vertical cable lifeline according to the manufacturer's instructions.
3. Attach the cable sleeve to the front attachment point, designated for ladder climbing, of the full-body harness
using a Miller approved auto-locking carabiner or other Miller approved connector.
4. Verify that the carabiner (or connector) keeper/gate is closed and locked.
5. Ascend and descend the ladder passing intermediate cable guides per the manufacturer's instructions sup-
plied with the cable sleeve.

7.0 Training

It is the responsibility of the user and the purchaser of this equipment to assure they are familiar with these in-
structions and are trained in the proper use, installation, operation, inspection, maintenance and limitations of this
product. Training should be conducted periodically and without exposing the trainee to a fall hazard.
Training is an integral part of our Total Solution in fall protection, since no fall protection equipment – regardless of
how effective – can save an employee who is not trained in its use. To meet this crucial requirement, Miller Train-
ing provides the knowledge and skills necessary to achieve a safe, more productive work environment.
actoolsupply.com
Us er Instr ucti on s - E ngl ish
Vi-Go Anchorage Connector
The Vi-Go Anchorage Connector is designed to provide a
convenient tie-off point for workers when entering/exiting at
the top of Vi-Go Vertical Cable Lifeline Systems.
Go Anchorage Connector is designed for one person only
with a capacity of 310 lbs. (140.6kg).
Model
TRS-AC1
TRS-AC2
WARNING: All instructions and warnings pro-
vided with the anchorage connector must be
read and understood before using the equip-
ment.
14
actoolsupply.com
Compatible Top Bracket Assembly
Compatible with the 5ft. (1.5m) top bracket
assembly (with 1.5" x 1.5" tube)
Compatible with the 7 ft. (2m) and 10 ft. (3m) top
bracket assemblies (with 2" x 2" tube)
The Vi-