Advertisement
Advertisement
Table of Contents
Related Manuals for Moretti Forni T Series
Summary of Contents for Moretti Forni T Series
- Page 1 Manuale di istruzioni Instructions manual Manuel d’instructions Bedienungsanleitung Manual instrucciones م ا د T64E T75E T97E TT98E Forno elettrico Electric oven Four electrique Elektrische Ofen Horno Electrico ن Numeri di matricola / Serial numbers : Cod.73341170 Ver.: A11...
- Page 2 - m a i l : i n f o @ m o r e t t i f o r n i . c o m DICHIARAZIONE DI CONFORMITA’ DECLARATION OF CONFORMITY MORETTI FORNI S.P.A. Il costruttore The manufacturer Indirizzo del costruttore/ Manufacturer address: Via A.
-
Page 3: Pulizia Generale
ATTENZIONE ISTRUZIONI SEGUENTI RELATIVE ALLA “MANUTENZIONE STRAORDINARIA” SONO STRETTAMENTE RISERVATE PERSONALE TECNICO SPECIALIZZATO MUNITO DI REGOLARE LICENZA, RICONOSCIUTO ED ABILITATO DALLA DITTA COSTRUTTRICE. MANUTENZIONE STRAORDINARIA NOTA: Non pulire i cristalli temperati degli sportelli quando sono ancora caldi. OPERAZIONI PRELIMINARI DI SICUREZZA Non utilizzare solventi, prodotti detergenti contenenti sostanze aggressive ATTENZIONE! Prima di effettuare qualsiasi operazione di... - Page 4 - Chiudere il pannello porta componenti elettrici seguendo la procedura al punto ACCESSO AI COMPONENTI ELETTRICI 5.3.3. 5.3.1 APERTURA PANNELLO PORTA COMPONENTI ELETTRICI Eseguite le operazioni al punto 5.1 per l’apertura del pannello porta componenti 5.3.6 SOSTITUZIONE MOTORE/MOTORIDUTTORE NASTRO elettrici procedere come segue: - Togliere le viti (fig.17 part.V).
- Page 5 T75E T97E: il forno è dotato di due termocoppie, una Superiore ed una Inferiore. NOTA: Assicurarsi che all’interno del forno TT98E la parte finale Togliere il portello sinistro superiore o inferiore (fig.18 part.A-W) svitando le viti di delle resistenze sostituite entrino nella loro sede, vedere la corrispondente fissaggio, per accedere alla termocoppia superiore o inferiore.
- Page 6 T64E-TT98E: Prendere una delle maglie di giunta laterali e dopo avere osservato - Solo su T64E scollegare i terminali delle resistenze utilizzando una seconda come sono montate le estremità del nastro (fig.24b) agganciare prima la parte chiave sul controdado come antirotazione per evitare la forzatura del laterale esterna e poi quella interna eventualmente aiutandosi con la pinza a becchi terminale.
- Page 7 - Scollegare i faston che collegano il ventilatore. La procedura guidata chiede l’inserimento dei seguenti dati: - Svitare e togliere le 2 viti di fissaggio posteriori del ventilatore lingua - Allentare le 2 viti di fissaggio anteriori e spostare il ventilatore verso la parte data/ora posteriore del forno.
- Page 8 IT/16...
-
Page 9: Warranty
INDEX 01 TECHNICAL SPECIFICATIONS 02 INSTALLATION 03 OPERATION 04 ORDINARY MAINTENANCE 05 EXTRAORDINARY MAINTENANCE 06 SPARE PARTS CATALOG Note: This manual is printed in six different languages. Original instructions in Italian and translations of the original instructions in English, French, German , Spanish and Arabic. -
Page 10: Installation
always make sure that plastic materials are sent to safe places, to avoid any TECHNICAL SPECIFICATIONS danger of asphyxia, particularly for children. At the end of the appliance’s DESCRIPTION OF THE APPLIANCE working life it must be disposed of at legally authorised recycling plants. The oven comprises a baking chamber through which runs a conveyor belt carrying the product, which is cooked by a jet of air heated by electrical heating elements;... -
Page 11: Electrical Connection
- Connect up the rest on the right hand side or on the left hand side (fig. 9 item D), When connection has been completed, check that the supply voltage, with the after removing the flour collector and replacing them on the support bar itself (fig.9 appliance running, does not differ from the rated value by more than ±... -
Page 12: Starting The Oven
The three parameters to be set for cooking are: the ceiling temperature, the floor NOTE: LCD not TOUCH SCREEN. If the display is pressed, this can temperature, the cooking time (time it takes the pizza to travel through the baking cause permanent damage which may stop the oven from functioning chamber, which is directly dependent on the belt speed). - Page 13 It is the function that lists the latest programs used. Select the desired program NOTE: The above operation can also be carried out during cooking, and with the up/down arrow keys and then press OK to operate. Press START to start in both cases if modifications are made to one of the values from a generic heating/cooking time with the parameters of the selected program.
-
Page 14: Switch On Timer
press “OK” to confirm. Press “RETURN” to go back to the previous screen NOTE: <NO DIRECTORY> indicates that the USB device is missing or without confirming the changes. not inserted correctly into its slot When the switch-on timer is enabled, the “Switch-on Timer” (fig.28 part. 6) is enabled, while the message bar with the oven in STOP mode shows among the •... - Page 15 cooking time, for a total cooking time of 24 minutes. This setting is not provided for - “2 temperatures”: (fig. 28) proceed to set the temperatures using the standard operations. top ”+” and “-“ keys to change the ceiling working temperatures, using the bottom ”+”...
- Page 16 manual reset: one for the left side (fig.14 item P) and one on the right side of the WARNING! Any Programs stored in the memory will be deleted; oven (fig.36 item G). run the "EXPORT USB" procedure described in 3.2.6.1 if programs must be WARNING! If the appliance is still malfunctioning when it is saved before the Default procedure.
-
Page 17: Routine Cleaning
STOPPING T64E: ROUTINE CLEANING To stop the appliance, press the STOP button (fig.29 item 17); the fan and After carrying out the operations described in point 4.1 above, clean the movement of the belt will continue for about 30 minutes to bring down the appliance as follows: temperature gradually and safeguard the duration of the components;... -
Page 18: General Cleaning
WARNING FOLLOWING INSTRUCTIONS, WHICH CONCERN “SPECIAL MAINTENANCE” ARE STRICTLY RESERVED TO SPECIALIST TECHNICIANS WITH THE RELEVANT LICENSE AS WELL AS BEING APPROVED BY THE MANUFACTURER. SPECIAL MAINTENANCE Before starting up the appliance again, make sure that none of the cleaning equipment has been left inside. - Page 19 TT98E: For the parts on the opposite side of the gear motor, open the switch panel After carrying out the operations described in 5.1 above, to replace the safety by turning it (fig.17 item Z); while to access the parts on the gear motor, loosen the thermostat proceed as follows: 2 fastening screws (fig.16 part L) and rotate the side panel.
- Page 20 - Disconnect the cable from the electrical board and slide out the thermocouple. REPLACING THE TFT DISPLAY - Replace the thermocouple taking care to connect the connectors in the right After completing the operations in point 5.1, to replace the TFT Display or the poles.
- Page 21 - Disconnect the fan wiring and remove the bracket and fan loosening the 3 5.9.3 REVERSING CONVEYOR BELT DIRECTION MOVEMENT fastening screws (fig. 38 part.K-Z). - After carrying out the operations described in 5.1 above, to reverse the conveyor - Remove the back panel of the cooking chamber, loosening the fastening screws. belt direction of movement proceed as follows: - Move to a worktop.
- Page 22 In case of a lack of ventilation, it serves to de-activate the heating elements on the LIST OF SPARE PARTS corresponding side (if there is an anomaly in the CEILING temperature, look for it Index of plates: on the left side, while for FLOOR anomalies, look on the right side). Plate A T75/E –...
Need help?
Do you have a question about the T Series and is the answer not in the manual?
Questions and answers
I sen me user guide for T64G oven in English
The user guide for the Moretti Forni T Series T64E oven in English includes the following key points:
1. Safety Warnings:
- Do not store or use flammable liquids near the appliance.
- Incorrect installation or maintenance can cause damage, injury, or death.
- Only authorized installers should perform installation and start-up.
- Use only original Moretti Forni spare parts to maintain warranty and safety.
2. Initial Start-Up:
- Turn on the oven using the main switch marked “I” for on and “O” for off.
- For first-time or post-downtime use, open the two side panels, set temperature to 250°C (480°F), and run the oven for 2 hours to complete the burn-in.
- Ventilate the area during this process as it may produce odors.
3. Control Panel Indicators:
- Displays ceiling temperature, floor temperature, set cooking time, and status.
- Lock icon changes color (gray for disabled, orange for enabled).
4. Installation Instructions:
- Use only the 4 provided brackets (2 front, 2 back) for raising the oven.
- Secure the unit to the ground or appropriate supports.
- Do not transport the oven manually.
- Place the oven in a clean, dry, and dust-free location.
5. Warranty Conditions:
- Valid only if installed and started by authorized personnel with a demonstration of operation.
6. Electrical Diagram:
- Located in section 6 of the manual.
Note: “T64E” is specified, not “T64G”. If “T64G” is correct, further information is needed.
This answer is automatically generated