Back Panel; Ports For 10/100/1000Base-T Ethernet Connectivity - NETGEAR GS724TPv2 Hardware Installation Manual

24-port gigabit (hi-power) poe+ ethernet smart managed pro switch with 2 sfp ports and cloud management
Hide thumbs Also See for GS724TPv2:
Table of Contents

Advertisement

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

Back panel

The back panel provides a Kensington lock and AC power receptacle. (The switch uses
a fixed, internal power supply.)
The following figure shows the back panel of model GS724TPv2. Other than the label
under the AC receptacle, the back panel of model GS724TPP is identical.
Figure 3. Back panel
RJ-45 Ports for 10/100/1000BASE-T Ethernet
connectivity
All RJ-45 copper ports support autosensing. When you insert a cable into an RJ-45 port,
the switch automatically ascertains the maximum speed (10 Mbps, 100 Mbps, or 1 Gbps)
and duplex mode (half-duplex or full-duplex) of the attached device. All ports support
a Category 5e (Cat 5e) unshielded twisted-pair (UTP) cable terminated with an 8-pin
RJ-45 connector.
To simplify the procedure for attaching devices, all RJ-45 ports support Auto Uplink
technology. This technology allows attaching devices to the RJ-45 ports with either
straight-through or crossover cables.
When you insert a cable into the switch's RJ-45 port, the switch automatically performs
the following actions:
• Senses whether the cable is a straight-through or crossover cable.
• Determines whether the link to the attached device requires a normal connection
(such as when you are connecting the port to a computer) or an uplink connection
(such as when you are connecting the port to a router, switch, or hub).
• Automatically configures the RJ-45 port to enable communications with the attached
device. The Auto Uplink technology compensates for the need to set up uplink
connections while eliminating concern about whether to use crossover or
straight-through cables when you attach devices.
All RJ-45 ports also support Power over Ethernet (PoE+, IEEE 802.3at). The switch can
supply up to 30W PoE+ to each port. The maximum PoE power budget across all active
PoE+ ports is 190W for model GS724TPv2 and 380W for model GS724TPP.
Hardware Overview
15
Hardware Installation Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs724tpp

Table of Contents