Samsung DM65d Series Manual page 2

1.7 Repeat Steps 1-6 for all T.V.'s that need settings changed.
Part 2 – Samsung DM65d/e TV Settings
2.1 Set Source Input. Note: Set Source Input type first as settings are stored and set by source input type
(DVI, DisplayPort, etc.)

Set the input on TV's 1 & 5 to DVI.

Set the input on TV's 2, 3, 4, 6, 7, 8 to Display Port.
Note: The following settings are accessed through the Home button on the remote.
2.2 Picture Mode Settings

Under Home -> Picture -> Picture Mode

Set Picture Mode to "Calibration"
2.3 ID Settings

Under Home -> ID Settings

Set the Following Items:
o Set Device ID to match the ID layout in Step 1.2. Note: Device ID is different than the
video wall screen position number shown below.
o Set PC Connection Cable to RS232C Cable
2.4 Video Wall Settings

Under Home -> Video Wall

Set the Following Items:
o Apply to "Current Source"
o Video Wall – On
o Format - Natural
o Horizontal – 2
o Vertical – 2
o Screen Position – Set Corresponding to Display Position
2