Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Bazzaz Manuals
  4. Automobile Accessories
  5. ZFi
  6. Installation instructions manual

Bazzaz ZFi Installation Instructions Manual

Fuel management/fuel+qs + traction control
Hide thumbs Also See for ZFi:

Advertisement

Quick Links

Download this manual
INSTALLATION INSTRUCTIONS
UNLEASH.
THE SMARTEST PERFORMANCE TUNING TECHNOLOGY
FUEL MANAGEMENT
YAMAHA FJ-09 | 2015
F794 | T794
1>READ
WARNINGS >
•
We strongly suggest that an experienced technician install this product.
Read through all instructions before beginning installation.
•
•
This document is intended for use by qualified technicians.
•
This is not a replacement for the factory Engine Control Unit (ECU).
•
Refer to a factory service manual for more specific stock component
identification/location information and removal/assembly procedures.
WARNINGS >
Use only in race or other closed-course applications and never on public roads.
•
•
Z-Fi products are not certified by the California Air Resource Board (CARB) for
use on CA highways.
GETTING HELP
Factory support is available in the US at 909-597-8300.
•
•
For fastest support outside of the US, find your local importer at bazzaz.net.
FUEL + QS + TRACTION CONTROL
INSTALLING
USING
R

Advertisement

loading
Need help?

Need help?

Do you have a question about the ZFi and is the answer not in the manual?

Questions and answers

Related Manuals for Bazzaz ZFi

Summary of Contents for Bazzaz ZFi

  • Page 1 Z-Fi products are not certified by the California Air Resource Board (CARB) for use on CA highways. GETTING HELP Factory support is available in the US at 909-597-8300. • • For fastest support outside of the US, find your local importer at bazzaz.net.

  • Page 2: Included Parts

    4. Shift Switch and mounting hardware (For Z-Fi TC only) 5. Scotchlok (4) 6. Speed Amplifier 7. USB cable 8. Swingarm stickers 9. Velcro 10. Download Bazzaz software from bazzaz.net/index.php/software-overview FUEL HARNESS 1. Main 2. +12v SW Power 3. Z-AFM 4. Map Select 5.
  • Page 3 3. Airbox 4. Both side fairings 4>SECURE 1. Mount the Bazzaz control unit using the supplied Velcro within the tail section beneath the passenger seat. 2. Connect the Bazzaz fuel harness and begin to route the harness towards the engine compartment along the left hand side of the bike.
  • Page 4 2. Separate the factory dark grey wire, and use the supplied scotchlok to crimp onto the dark grey wire. 3. Connect the Bazzaz CKPS connector. FACTORY BAZZAZ 1. Locate the factory neutral connector, which can be found in front of the ABS module mounted to the black plastic under tray.
  • Page 5 2. Disconnect the factory speed sensor connector. 3. Install the Bazzaz speed amplifier inline. 4. Connect the Bazzaz speed amplifier to the Bazzaz speed connector on the Bazzaz fuel harness. 1. Route the remaining Bazzaz injector connectors towards the front of the throttle bodies.
  • Page 6 3. Connect the Bazzaz TPS connector. BAZZAZ 1. Locate the Bazzaz ground lug and install on the factory negative battery terminal 1. Locate the factory tail light connector, which can be found on the right hand side of the bike in the tail section.
  • Page 7 2. Remove the factory shift rod. 3. Install the Bazzaz shift switch using one of the supplied allen stud bolts, and tighen. 4. Begin to install the Bazzaz shift rod. (The shift rod may need to be cut to obtain original shift pedal height.)
  • Page 8 You can switch from map 1 to map 2 by unplugging the map select jumper on the Bazzaz fuel harness. Map 1 will be pre-programmed; depending on your model, there may be a pre- programmed map in the map 2 slot.
  • Page 9 Factory support is available in the US at 909-597-8300. • • For fastest support outside of the US, find your local importer at bazzaz.net 11>REINSTALL After it is determined that everything is correct, reinstall the components removed in step 3.
  • Page 10 Weatherproof toggle and easy installation. 79.95 SELF MAPPER Purchased separately. Build race-level fuel maps for your specific modifications, fuel type, engine, and atmospheric conditions simply while riding. 02 sensor mounts into exhaust and control box easily plugs in to any Bazzaz Z-Fi product. 299.95...
  • Page 11 MAP SELECT/ TC ADJUST SWITCH Purchased separately. Switch maps on the fly with this handlebar-mounted switch. Quickly adjust traction control settings using a 10-point dial. Weatherproof toggle and easy installation. 129.95 TC ACTIVE LIGHT Purchased separately. Illuminates when traction control is engaged.
  • Page 12 THE SMARTEST PERFORMANCE TUNING TECHNOLOGY F794 |T794...

This manual is also suitable for:

Zfi tc